Whirlpool Calypso GVW9959K washer after cycle is complete clothes are still dirty and some still dry

It's hard to tell by your description of the problem, but it sounds like it could be the timer If it's not running while in spin mode, or as simple as a belt if it's running and not spinning fast enough.

sssssss

hi is the machine noisy on spin cycle if so ur bearings have gone

This machine only sprays the water, you may never see the clothes completly covered with water it just sprays the water in intervals. You can download a user guide at whirlpool.com select owner center than literature in drop down menu, requires adobe. Hope this helps

This is a common problem with the Calypso washers. The problem that you are having is related to the pump. There is something in the pump that is causing the error code to occur. Since the pump isn't working right all of the water isn't draining out thus causing it to be out of balance. If you can get down to the pump and check it out chances are you will find something in it. It might just be some fabric or string from clothing caught around the pump motor. Just make sure you clamp off the hoses or you will flood your laundry room. Once you clear out the pump unplug the washer and wait a few minutes before plugging it back in. Let me know if you have any other questions and let me know if this was helpful. Good luck and glad I could help.

Something is locking down the aggitator. The motor will burn up if you keep trying to run it while it is unable to turn so please un jam it then try it again.

this is common with this model
may need a new lid

Ebay item number 200262803398 is a cheap PDF service manual for this model.

prem

When changing a pressure switch on a calypso you have to be sure the tub is empty. blow air into the hose to clear, also observe for moisture where the hose connects to the tube for a pin hole leak in the tube.

at this point i hate to do this but if yo want a free replacement you have to contact whirlpool. this was involved in a class action lawsuit and they are making the repairs for free. otherwise replacing the pump is simple and you can get them off ebay for really cheep. :)