Question about Kenwood KDC-MP235 CD Player

2 Answers

Kenwood cd receiver KDC-MP436U

Screen says PROTECT and nothing works

Posted by on

  • sehrishraj Nov 11, 2008

    screen displays protect and donot performs any function solve this problem.

  • basheerbalum Feb 15, 2009

    protect all the time

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Protect:- The speaker wire has a short circuit, or touches the chassis of the vehicle, then the Protect function is activated. Wire or insulate the cable properly and then press the reset button. If the "Protect" code does not disappear, consult your nearest service centre.

Posted on Apr 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

U need to reset the sucurity code on the unit, if u bought the unit new .or have the manual, it should tell u how to do this. if not contact kenwood and see if they can help
http://th.kenwood.com/Car_Entertainment/1DIN_Receivers/KDC-MP436U

Posted on Apr 24, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kenwood KDC-U453 cd receiver displays "PROTECT" on connection and nothing works - any solutions appreciated!!!!


Pull the radio out, tape off all wires but yellow, red and black. Twist red/ yellow together and attach to positive 12 volt, attach black wire to negative 12 volts. Turn on radio and see if it comes out of protect mode. If it does, you will have to troubleshoot all of the speaker wires to find a short.

Apr 11, 2013 | Kenwood Kdc-u453 Car Audio Radio Iphone...

1 Answer

How do I get my kenwood kdc mp 142 off protect nothing is working


Check all your speaker wires and make sure thery're not shorting out. Check all your wiring to be sure.

Apr 12, 2010 | Kenwood KDC-MP142 Car CD/ MP3 Player

1 Answer

I have a Kenwood kdc-mp2035 and it says protect on the screen and plays no music. how do i get rid of that so i can listen to my music again????


You can try pressing the reset button, worked for me for months but now, for me, the "PROTECT" never goes away... But the reset button worked for months, give it a try!

Sep 02, 2009 | Kenwood KDC-MP2035 CD Player

2 Answers

Screen shows PROTECT and i can't hear nothing and do nothing


The receiver is in protect mode either due to heat or crossed speaker wires. Heat would take a while to shut off and a while to turn back on. The speaker wire short would be detected immediately.

Mar 07, 2009 | Kenwood KDC-MP208 Car CD/ MP3 Player

2 Answers

Kenwood cd radio player flashing the word protect


i installed this strero in my car and all i get is the word protect .now what do i od

Oct 24, 2008 | Kenwood KDC-MP335 CD Player

1 Answer

Kdc-mp6036 kenwood cd player jus cant find the code


Today i brought a 98 ford and the dealer replaced the cassette player with a Kenwood KDC-MP6036 from a trade in they had. It was fine for 30 min approx then music stopped and "PROTECT" was displayed and now nothing works ???? what can i do

Aug 07, 2008 | Kenwood Audio Players & Recorders

6 Answers

Security Code for Protect mode


Turn on the car so the radio is flashing "Protect." Look on the front / removable face of the stereo. On it you will find a small round hole - that's a reset button. Find a small paper clip, unfold the clip and stick it gently into the hole. The "Protect" will stop flashing, and Kenwood will be displayed. Unfortunately all your settings/presets will be gone, but at least the stereo is working again!

Apr 30, 2008 | Kenwood KDC-W3534A CD Player

7 Answers

Kenwood KDC-MP235


Kenwood KDC-MP436U Pressed incorrect code to many times and now protected is displayed on screen. I have lost my code. Tried reset button and disconnecting all the wires. I am so annoyed that they have this code, though happy that I am not the only one that has lost it!! :) PLEASE HELP ME Cassandra

Sep 02, 2007 | Kenwood KDC-MP235 CD Player

Not finding what you are looking for?
Kenwood KDC-MP235 CD Player Logo

2,369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4874 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...