I have the same problem..u should chack the adapter....u gotta buy it u dont need any software or anything..... JUST PLUG IT IN 2 THE COMPUTER AND TO THE ELECTRIC CURRENT..THAT IS...AND IT WILL START WORKING.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Access the manufacturer's web-site: http://support.hp.com
and enter '5200C' and do the search.
Select the device-drivers for the Operating System that is installed on your new HP computer.
Download & install.
After you have UnScrewed and Opened Up the Scanner. On the Circuit Board (Green Board with Electronic Components) just where you Plug in the Power Pin there is a Small Glass Tube Looking Component. You need to replace that with a 1.2mA Fuse.
advises that, on some systems, the scanner hardware may get into an
error state that will keep the scanning software from finding the 3200c
ScanJet. If your scanner still isn't found after installing this driver
and software update, please follow the directions below:
Unplug the power cable from the 3200c ScanJet.
Unplug the parallel cable(s) from the 3200c ScanJet.
Shut down the PC and wait for ten seconds.
Plug in the power cable to the 3200c ScanJet.
Plug in the parallel cable(s) to the 3200c ScanJet.
Power your PC on.
If you still have the problem, uninstall the driver from device manager, and download and run this .exe file version of the driver instead.. and if necessary, repeat the above steps..