Question about PC Desktops

1 Answer

My 12 mth old compaq wf1907 computor freezers up from time to time. mouse still darts around but activates nothing. i have turn off and start again

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Hi buzan, the model number you provided is your Compaq montior. That's ok though.
Computer freezes are usally generated by software. Suggest you de a few things.
1. You can run windows system restor back to a date the pc did not freeze.
2. Run a full system's virus scan. (make sure your virus software is up to date). Anti-virus software subcription no longer valid?
Download AGV for free. Click the link below to download.
http://free.grisoft.com/doc/download-free-anti-virus/us/frt/0

3. Your windows needs cleaned. Download a free cleaner. Click the next link.
http://www.pctuneuptips.com/recommends/clean/?gclid=CL2RiIrTmpICFSFMGgodODIPzg
4. Your mouse is defective, replace your mouse.

Need more help feel free to ask.
Thanks for using FixYa
Good Luck & Kind Regards.

Posted on Mar 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Laptop has black screen on startup. what do i do to repair this.


I have a similar problem:


I have a Compaq Presario SR2010NX desktop computer. Recently, very occasionally, the computer would freeze and the screen would scramble. It almost looks like someone chopped up the picture on the screen. Then we would have to manually shut down the computer and restart. It would always work fine afterwards.

Yesterday the computer did it again. It restarted fine but when my boyfriend tried to install a new mouse the computer froze again and the screen went scrambled. Well this time it did not start back up. I tried to unplug the computer from the wall and restart but that got me to the COMPAQ screen and then the computer froze again and the word compaq was doubled all the way down the screen. We continued to try to start it in PC recovery but it would get the the program and freeze. I actually got it to run once but I couldn't see what it was doing because the screen was scrambled.

Now we have restarted it so many times that it will start up, light turns green, and stays green. The computer sounds like its starting up and it seems louder than normal. The computer doesn't do anything and the screen is black. The lights on the keyboard do not turn on but the light in the mouse does. The CD drive will light up and run as well but nothing happens after that. I can't see the cursor and the keyboard does not work.

I opened the computer up, cleaned the dust off, tried to re-install my old RAM and that did not work either. I disconnected the CD drive but that did not work. Tried to start the computer with nothing plugged in except mouse, keyboard and monitor and that did not work.
I don't know what to do! Help!

Oct 21, 2010 | PC Desktops

1 Answer

I was using the computer for a short time, just reading news on the internet when it beeped three times and the monitor went blank and the mouse and keyboard also stopped working. I had to do a hard...


hi your cpu fan might be loose or your RAM open pc and make sure cpu fan is secure if its loose a little tighen it or your RAM might have popped out it can get very hot around RAM and sometimes it pops out ...hope this helps be carefull...bonnell

Sep 23, 2010 | Gateway FX7026 PC Desktop

1 Answer

Compaq Presario stuck in sleep mode


Connect the monitor to some other computer, e.g., a notebook, and see if it does the same thing. If it does, then the monitor is the problem.
If it does not, then your computer is not putting-out any "video" signal, and so the monitor goes to "sleep".

If you have MORE than one VGA-output port on your computer, connect your monitor to the "other" VGA port.

Or, press-and-hold the ON/OFF button on your computer, to force it to completely shutdown.

Jan 13, 2010 | HP Pavilion a1710n (RK573AA#ABA) PC...

1 Answer

I powered down my computer because I couldn't get my mouse to work. When I powered it back up nothing booted up! The lights are all on and fans are running, but the monitor isn't getting any signal from...


I beleive that this is a virus. some Viruses corrupt the device settings on a mouse or keyboard. you will to try to boot the computer in safe mode. to this when you tun the computer on press the F8 btton on the keyboard. then select safe mode with networking and hit enter. when the computer boots up you will need to run a virus scan. another option is to take the hard drive out of the computer and put it in another computer and run a virus scan on it. Viruses that usually cause this type of problems are redirect viruses found when searching on google.

Jan 09, 2010 | Compaq Presario SR1000T (568657) PC...

1 Answer

Compaq Presario 5000 won't turn on


hi,
The machine is getting the power but no display.This seems a RAM or motherboard issue.
1.Press and release NUM Lock after turning on and if it is responding this is a RAM issue and if not then the mainboard issue but before all refix the RAM once.
Thank You.

May 30, 2009 | HP Compaq Presario SR1830NX PC Desktop

1 Answer

HP Optical Mouse Curser jumps around


I respectfully disagree with amusedgeek. He is correct aout the textured surface,though.Optical mice will take snapshots many times a second and reposition the cursor according to where the pattern was last. Rather than a single color, a pattern is your best bet for an optical mouse. The only thing I recommend is to make sure the mousepad isn't reflective at all- no glossy or semi-glossy surface. You want it to be non-reflective. Just to be sure there is nothing wrong with the mouse, you can test it simply by putting it on a newspaper and scrolling around.

Jan 11, 2009 | HP PC Desktops

1 Answer

Compaq Presario SR1123WM PC Desktop will not start up.


try starting it in safe mode, when click the power bottom press f8 repetitively then select safe mode. then restart it again.

Dec 03, 2008 | HP Compaq Presario SR1123WM PC Desktop

1 Answer

I have just purchased an acer notebook lap top. will not accept a 12 mth old c4180 printer. it tells me in word vista you must have administrator rights to the conputor to install the printer. if you do...


Hi jmc66884,

Are you getting the user account control prompt? if your printer came in with the setup CD that is compatible with Vista just right click the setup.exe that you can browse inside the CD and choose run as administrator, I believe by trying that process your installation should progress.

hope this solve your printer installation problem.

May 06, 2008 | PC Desktops

1 Answer

Please HELP


Brenda,

Where you from?

Mar 19, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...