Question about Mitsubishi WS-65809 65" Rear Projection Television

1 Answer

Service manual I would definately like the link where i can get the service manual for my mitsubishi ws-65809, also any suggestions of where in the circuit to look first would be helpful.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Here is the link to the site for the manual your model is on page 3 of the mitsubishi section for 12.99. They do maintainance in the evening so if you cant get in try in a few minutes. You will have to forgive me but I do so many mitsubishis that I am not sure which problem youre refering to. I am currently helping around 20 people with mitsubishi. Just repost your symptom and I will certainly give you some direction.
http://servicemanuals.vstore.ca/

Posted on Mar 20, 2008

Testimonial: "Thanks!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mitsubishi ws-65809, the tv won't power


I presume you unplugged the set and redid the check:

2,3 is deflection circuit problem (probably in Horizontal sweep circuit) and can be almost anything---check output transistors and look for cracked or bad cap in that area.

The error code is only a general indication of the kind of problem and this one is like saying car will not start etc.

Mar 18, 2012 | Mitsubishi Televison & Video

1 Answer

Mitsubishi tv ws-65809 shuts down after a few seconds, get a code 23. I was reading a post you said that only needed to soder something?


2,3 is a deflection circuit failure; These sets rarely have soldering problems there or elsewhere.

I would suggest either it is a shorted part in that area (High Voltage and sweep circuits) or it is possible it could be a Glycol issue.

A deflection circuit problem would require a schematic (widely available on internet for free) and a meter to check for voltages and or for shorts.

Glycol can be inspected for visually and if seen care must be taken.

Let me know if you have questions.

Last suggestion would be if you have not done it, unplug set (this clears the error buffer) and plug back and turn set on, if it fails double check the error code again.

Steve J.

Nov 04, 2011 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Mitsubishi WS 65809 65" Rear Projection TV. Turns


Hello There, Its seems that the circuit board has problems. You'll have to get it replaced ASAP before the board is ruined completely.
The same thing also happened to me 2-3 weeks ago. the techs came in and had to replace the board since 1 circuit was damaged.
It will cost around $100
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 13.0px Arial}

Thank you for using FixYa!

I hope that I helped you & that this post is helpful to you at most!

Don't forget to rate! :)

Jan 16, 2011 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Sodering


you need to get Service (repair) manual for your TV Mitsubishi WS-65809 and its available at THIS site on fee.
service manual has all necessary details of tv.

Oct 13, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Ws-55809 mitsubishi projection tv tunnel vision


Good Day, kammey;
Sounds like your TV is having a Convergence Circuit failure. NOT an easy repair, so, call an Authorized Factory Service Center to come to your home and give an estimate B4 repair, $450.00-$650.00, depending on your location and the cost of gas. Good Luck, big IRISH.

Sep 01, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Power on and off


you would need to trouble shoot the standy voltages and see whats happening with them. I would suggest getting a service manual from the following link as they will email it to you quickly after purchase and they will provide free tech support to help you diagnose and repair your set. Heres the link.
http://servicemanuals.vstore.ca/

May 26, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Mitsubishi ws-65807


I suggest to visit the website of manufacture to have both question answered . thanks

Apr 27, 2008 | Mitsubishi WS-65809 65" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65809 65" Rear Projection Television Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1198 Answers

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...