Question about Akai PDP4295ED 42 in. EDTV-Ready Plasma Television

2 Answers

Color problems our color on the screen has turned greenish-blue. cannot adjust colors to add red's to even colors out.

Posted by on

  • Ashley Jones Sep 21, 2008

    The color on my Akai flat screen went to a greenish yellow color, and I can't seem to get any red tones at all, no matter what I do. Any thoughts or suggestions?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem... today I got a digital satelite tech come out and hooked a HD digital reciever to the tv and now I have the greenish/yellowish/blue tint hhhmmmmmmm?

Posted on Jul 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem - have anyone found a fix for this?

Posted on Nov 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The grey in my relaxed brown hair occasionally turns a greenish color I use adore semi permanent, dark chocolate any idea how to avoid this?


Your hair is turning green because your missing red when you color your hair. Gray is uncolored hair and to get to a dark chocolate brown you need to add a little red to the color to make up for this. You don't need to strip it out.

Have you heard of people using purple shampoo to neutralize the yellow tones of their blonde? Red will neutralize the green tones, so adding a little red to your color will do this for you.

Mar 09, 2014 | Adore LVT Semi Permanent Hair Color 112...

1 Answer

My tv screen look like yellowish blue greenish color


Your Tv have color problem theres a lack of red color and the problem is is in the chroma section of the board.Ethier cold solder or deffective chroma ic.

Jul 06, 2011 | Televison & Video

4 Answers

Blue will not focus causing "shadows". Magic focus will not solve the problem.


This tv have a problems call convergence,it dead.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jun 17, 2010 | Hitachi 53FDX20B 53" Rear Projection...

2 Answers

Monitor colour problem


the VGA cable connecting from moniter to the computer is faulty so replace new

May 25, 2009 | Samsung SyncMaster 793MB 17" CRT Monitor

1 Answer

I have a KP-65WV700 and the screen looks a lil to green


OK, I'm the guy that was having the same problem, but had a blue tint to the screen. I also had blue lines running across the screen, and when I followed the steps below that were posted by another user not only did the lines disappear, but the blue haze vanished as well. My tv looks like it's new again, so you may want to try this:

noavatar_s.gif Guest
Rank:nonexpert_s.gif Apprentice
Rating: 0%, 0 votes
I have fixed this several times on my KP 65WV700

As Slinteriors posted if it is a thin curved line you need to adjust the screen control, it's sorta like a brightness for each color, and if one color is too high it will produce a thin curved line.

The best way I have found to get to the controls is by removing the lower grey speaker cover front the front of the TV. There are 6 screws if i remember, 3 on each side. Then it snaps off, seems like its going to break but you have to pop it off pretty good.

Once its loose you have to remove a cardboard like cover plate in the center that will give you access to the small controller board.

Now be very careful while experimenting on which knob controls which colors. Turn them very slow, if you turn to fast you will cause your TV to shut down. If this happens, turn the adjustment back to original spot and turn TV back on and take it slow.

Adjust the correct color until the line just goes away. Its easiest to do this with a black screen.

Nov 18, 2008 | Sony KP-65WV700 65" Rear Projection HDTV

2 Answers

Mitsubishi tv problem


im assumiong you checked the tint in the menu options. if not go check it. other wise it sounds like you have a weak tube, or you do not know how to adjust the screen brightness. this is how i adjust the brightness (you dont need to touch the focus). turn the red up until your whole screen is tinted red, then do the same with the blue and the green. then go through each one and turn down just a little till your pic darkens a little. good luck

Sep 27, 2008 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Blue colors appear greenish in middle third of screen...there is a circle of yellowish green in the center of the screen


You have a bad optical block, the block has a 2 year warrnty but you will have to pay labor to have a tech change it

Aug 08, 2008 | Sony KDF-E50A10 50 in. LCD HDTV

2 Answers

SD-643HD5 64 in. Rear Projection TV


I had the same problem which was caused by a bad solder connection on my Green CRT driver board. The fix isn't too difficult if you've had some soldering experience.

1) Determine which CRT is going out (Reg, Green, or Blue). Looking at your convergence adjustment screen will help.
2) Unplug TV
3) Remove the front panel
4) Locate the driver board attached to bottom of the bad CRT.
5) Locate the two large heatsinks on the driver board, each has a transistor attached to it.
6) Touch-up the three solder connections on each transistor. Adding some new solder helps.

Jun 09, 2008 | Pioneer SD-643HD5 64" Rear Projection...

1 Answer

Monitor screen changes from regular color to a green tinted screen?


Is the cable connected securely? You may need to check your video card also. You may be able to disconnect the cable and get a red, green, blue icon on the screen. If that appears normal then there is nothing wrong with the monitor itself, it may be the cord or the video card.

Hope this helps!

May 31, 2008 | Dell 1503FP 15" LCD Monitor

1 Answer

Aadjusting screen colors


They should be adjusted to set voltages. however it is best to shut the color level to the lowest setting then try t balance the screens to achieve the best black and white picture. then turn up your color level. Your brightness level should also be set to 50 % then when you adjust for the best B&W picture. You will have better color and brightness when you reset your color and brightness levels. Hope this helps.

Feb 01, 2008 | Hitachi 57F500 57" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

450 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72196 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...