Question about PC Desktops

1 Answer

Hp pavillion dv4043ea over-current usb ports

HP DV4043EA gives error messages --> "Over-current in usb ports" , and disconnects usb devices automatically after a few seconds. Already sent to hp support with same problem six months ago .... now it has no support.

Posted by on

  • nmartins Mar 19, 2008

    I have the board out of "skeleton" and disconnected 2 of the ports phisicaly (connector) but the other 2 are atached with the board. is there any way to disconnect the other 2 ports phisicaly to ? the pc already went to hp suport and they upgraded bios. New bios don't support turn off usb ports by software".

    ps: tnks quadrantmind

  • Anonymous Dec 01, 2008

    I have the same problem and none of my ports are bent. I have an hp pavilion slimline and I've tried unplugging every thing including power cord. Now my computer is frozen.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Theres an over power voltage going to the usb ports look if any of the usb ports are bent otherwise try a pcmcia usb card

Posted on Mar 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why can't I get my HP s3100n to run USB 2.0?


I was window shopping at Rite Aide and I saw these adapters that you plug into your USB ports and their out puts were 2.0 and others I think it was 12.00 USD

Feb 06, 2014 | HP Hewlett Packard Pavilion Slimline...

1 Answer

Hp pavilion a610y Describe your hp pavilion a610y usb port Problem: Message tells me to unplug my highspeed device from my slow usb port on my zboard keyboard and plug it into one of 6 unused usb ports in...


It is referring to the USB ports on the back of your computer near where your keyboard plugs in. The front ones must be USB 1.1 which will cause this error.

Apr 01, 2011 | HP Pavilion A610y PC Desktop

1 Answer

I have 4 USB 2.0 highspeed slots in Back of computer and 2 In front but when I connect a 2.0 highspeed Falshdrive or my HP Printer it gives me a message saying this device could work faster if it would be...


u need to update the usb hubs drivers without the current drivers the 2.0 port will function as a 1.1 port go to the device manager and update drivers for the usb root hub

Jan 18, 2011 | Sony PC Desktops

1 Answer

Keep showing usb device failure message, when devi...


If your usb device is working properly then there might be a problem with the usb port so try another port on the backside of the cabinet to fix this problem

Thanks.

May 20, 2010 | HP Compaq dc7100 PC Desktop

1 Answer

USB ports not working, slow computer


The error you are getting is the USB port driver. I suggest disconnecting ALL of the items you have connected to ALL of the USB ports and rebooting. If the computer reboots normally, go back and install ONE and ONLY one USB device. Restart your machine. If it boots OK, shut down, remove that device and connect another one, restart again. Do this for EACH of the USB devices until you find one that causes the computer to boot slowly and/or generates the error message. That one is the culprit and needs to be repaired before reattaching to your system.

If, however, after removing all of the USB devices initially and rebooting, you still get the error message, then you have a USB driver problem. You will need to remove the USB driver and reinstall from a known good location (like HP's website) to fix the driver problem.

Jan 07, 2010 | HP Pavilion a1210n (ED895AA) PC Desktop

2 Answers

I have an Hp Pavillion a170n System by can't


Go to Printers . Put curser over the Printer icon . Press Right button on mouse . Go to bottom of meue PROPERTIES> when open at top menue selct ports. Configure port. other approach deleat printer and reinstall new printer. during set up will ask what port. USB sometimes uses virtual printing Ports. Another aproach is if USB ..Just pull cable from computer and stick in some other USB port forcing computer to reload driver to that port.

Nov 07, 2009 | HP Pavilion a1700n PC Desktop

1 Answer

Anytime I plug something in to the USB port it give a error message that states, Power Surge on the USB port. What can I do to fix this?


The USB device could be drawing more current than the USB port can supply or the USB port may be faulty.
Get a powered USB hub and plug it into your computer's USB port and then plug the USB devices into the powered USB hub.

Aug 16, 2009 | Dell Dimension 3000 PC Desktop

2 Answers

Installing hp pos pole display


Download the HP Pole Display Windows OPOS package (sp42198) which will install both the Windows drivers for the device and the OPOS drivers for the device.
The following is the Windows Device Manager screenshot after all the drivers are loaded for the HP USB Pole Display:

NOTE : The COM port number might be different on customer's unit.

mma01_0031979.jpg DeviceManager.jpg


Note: The pole display driver will automatically assign the next available virtual port in the system.


HP Pole Display Setup Software Utility

Download sp41532 - HP USB Line Display Configuration Utility from HP website.
Run the file and the Utility will come up as shown below
The COM Port would always be COM1.


mma01_0031982.jpg PoleDisplaySetup.jpg


Change the selection to the COM port listed in the Device Manager of the unit.

mma01_0031983.jpg COMPort.jpg

Click on the Welcome Message Tab and Change the Text and Click on “Write to Pole Display

mma01_0031984.jpg Messages.jpg

Now the text should be displayed on the Pole Display.

Nov 22, 2008 | POS X POS-X Black Pole Display w/ Serial...

1 Answer

Damaged usb port needs to be replaced on my HP Pavillion 513W computer. Need diagrams and step by step instructions


1-Shut down you pc .2-unplug the power cord.3-open the case .4-Find the usb wires trac them back to the board. 5-mark were the wires go with a marker.6-plug new usb port wires in.7-put the case back on pc.8-plug power cord in.9-turn on pc.10-plug your usb device in.

Jul 02, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...