Unable to access internet

go to Linksys.

If you need more help come back.

Post / thumbs / testimonial are welcome!

what is the error message that appears when you open ie8???

• hard wire the laptop to the router, which reestablishes the connection.
• set the connection to be wireless
• follow the prompts and you will soon be wireless again

Connection and signal strength depends upon the router. Just go through the settings on the wireless router, try changing the wireless channels.And also change the wireless mode on the router to 802.11g.This should be the compatible mode for your wireless adapter. to do this first connect the router with the help of an ethernet cable .Please follow the below steps:
1)Using your Internet browser, you can access the Router’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.1” (you do
not need to type in anything else such as “http://” or “www”). Then
press the “Enter” key.
2)
You will see the Router’s home page in your browser window. The
home page is visible to any user who wants to see it. To make any
changes to the Router’s settings, you have to log in. Clicking the
“Login” button or clicking on any one of the links on the home page
will take you to the login screen. The Router ships with no password
entered. In the login screen, leave the password blank and click the
“Submit” button to log in.
3)
Clicking on the header of the “Wireless” tab will take you to the
“Wireless” header page. From this page, the Router’s wireless radio
can be enabled or disabled (the default setting is enabled). Under the
“Wireless” tab, there are links that allow you to make changes to the
wireless network settings.
4)
Your Router can operate in three different wireless modes:
“g and b”, “g only”, and “b only”.
5)
Change the wireless channel to 9 or 11
Click on save changes once you have done this
This should work,if it doesnt work let us know the exact problem in detail.

do one thing remove the prefered networks from the list of prefered network sand after that connect to the network


u will be able to go online after that ....

This would most likely happen if your router is not configured to connect to the modem correctly. You said that you can connect to the router locally that means there is already a connection. The problem would be the routers configuration to the internet.

try to use other browser, check also your firewall try to disable it,and if you have an antivirus which is maybe not updated try to disable it also.
i hope it helps...

Try resetting the modem. It may be the Modem has to re-assign an appropriate ip address to your desktop.

Here you go.


http://www.linksys.com/servlet/Satellite?c=L_CASupport_C2&childpagename=US%2FLayout&cid=1166859916411&packedargs=sku%3D1160093476789&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=1641135852B03&displaypage=download#versiondetail


BTW, thank you for serving our country!!!!!!

Often the nets and subnets are NOT the same.. ie The Fixed connection often uses 192.168.0.1, 192.168.1.1, however sometimes the wifi is setup 10.1.1.1, or 10.0.0.1 etc, have you checked this? Esentially tho ya router is an "Acess Point" and ya Lappy etc is ya "Client" the links below has a lot of tutorials to help have a look. http://portforward.com/routers.htm http://portforward.com/guides.htm