Question about RCA DRC8320 DVD Recorder/VCR
My RCA dvd/vcr combo model number DCR8320N will not work. It barely comes on. I opened the top of it to see what's wrong but because I am not an expert at all on this issue I'n not sure what the problem is . The round turn thing in the inside will not turn for more than 2 seconds.
I don't have a code book for you, but I can tell you how to program the RCR660 using the automatic programming feature.
Programming RCA model RCR660 (no code search button)
While following these instructions, keep the following in mind:
device = the component you wish to control with your remote (TV, DVD, VCR, etc.)
DEVICE = the button labeled for the component you wish to program
1. Turn on the device you wish to program.
2. Turn off all other devices in the general vicinity.
2. Press and hold DEVICE
3. While holding DEVICE down, press ON/OFF and hold them both down until the LED turns on for that device.
4. Release both buttons.
5. Point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing.
6. If the device does not turn off, then continue to press PLAY and wait the required interval (for a maximum of 20 times) until the device turns off.
7. When the device turns off, press REVERSE, wait two seconds and continue doing this until the device turns back on.
8. To finish programming, press and hold STOP until the LED turns off.
Posted on Dec 31, 2007
SOURCE: RCA dvd-vrc combo model DRC8320N
RCA MODEL DRC832ON..NEED REFERENCE # FROM SUPPORT TECH 1-866-775-0976 TO REPLACE PROCUCT..RAC SOLD TO AUDIO BOX..SEND DRC8320N TO: VENTURER ELECTRONICS, 203 EGGERT RD, BUFFALO, NY, 14215..WHEN YOU RECEIVE REF #..NEDD TO HAVE RECEIPT FOR PRODUCT LESS THAN 1 YR FOR WARRANTY TO BE EFFECTIVE
Posted on Feb 05, 2008
all you have to do is press and hold code search when the light shows up let go of code search then press VCR and it will blink onces and let go of VCR and press OFF/ON about 50 times and then press enter onces and there you go
Posted on Mar 07, 2008
From: RCA Support [mailto:email@example.com]
Sent: Monday, May 12, 2008 2:52 PM
Subject: RE: DVD stopped playing
Let the unit sit with the AC power cord out of the wall for a couple of hours. Then hit the power button 10-15 times (with the AC power cord still out of the wall socket!) and then try again. If you continue to have problems unfortunately it sounds as though it is within the electrical assembly. It is hard to say exactly what caused it or exactly what the problem with the circuits are.
Posted on May 14, 2008
SOURCE: rca dvd\vcr locked on hello
The hello issue is most likely a faulty DVD-RW. These go out on thse models more than usual. Reset is a combination of 2 buttons. Press and hold the play and disk tray open or the power and play ( i forgot the exact sequence but you get my drift, press 2 buttons for about 10 seconds). You can also update the firmware...or atleast could before from RCA.COM but they no longer support this midel. I do have the software update on CD but it won't do any good on Hello issue. If worst comes to worst, open the player up and replace the DVD-RW drive.
Posted on Jun 19, 2008
Tips for a great answer:
Apr 05, 2012 | GoVideo Go Video DVD/VCR Combo
May 29, 2011 | Toshiba Televison & Video
Dec 04, 2010 | Samsung DVD-V9800 DVD Player/VCR
Jul 10, 2010 | RCA DRC6355N DVD Player/VCR
Jan 01, 2010 | RCA DRC8300N DVD Recorder/VCR
Mar 25, 2008 | RCA Universal Remote 3 Device Remote...
Jan 07, 2008 | Sylvania 6719DC 19 in. TV/VCR/DVD Combo
Aug 04, 2011 | RCA DRC8320 DVD Recorder/VCR
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: