Question about RCA 20V500T 20" TV

1 Answer

Rca tv Tv in standby and want come on r cut off

Posted by on

  • bolognie Mar 23, 2008

    I have a rca 32V434TYX1 "32"tv,SDTV. When I push on the power button on the front of the tv, the red light comes on, and it stays on, and their is no picture or no sound. And I can't turn it back off,unless I unplug it. None of the buttons on the tv will work, nor will the remote work, Just a blank screen, with no picture,or no sound. It acts like it is going to come on, when you plug it in, but then the red light by the sensor on front of the tv just comes on and stays on..

  • Anonymous Aug 23, 2008

    I'm having the same problem, except, when i turn it on, it sounds like it's going to turn on, but doesn't do anything.. i have to unplug it and plug it back in to get the standby light to come back on.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 252 Answers

Your tv had a lose connection . if you know how to soldering iron, resolder your tv,but be careful of short circuit it may damage your system.

Posted on Oct 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LED52B45RQ RCA TV will not turn on


Could be an open internal fuse or power supply failure. The "standby light" merely indicates that power is getting to the TV.

Jul 14, 2016 | RCA Televison & Video

1 Answer

RCA LED42C45RQ 42" LED LCD HDTV Shutting Off by itself


These flat panel tv's from china have cheap capacitors. Check to see if any capacitors have pushed up top, this indicates blown or dry capacitor. Replace with exact value, in the power supply area (is where they go bad). TV has a monitoring circuit, and if standby (or ready voltage) is not adequate, tv will shut off or stay in standby mode. Little tired today, so hope that gives you an adequate answer.

Feb 14, 2014 | RCA L37WD12 37 in. LCD HDTV

1 Answer

Standby light blinks and tv wont cut on


How many times the standby light at its front panel blinks? Count it. These blinks are fault indications. Check this link for more details about Sony Blinking codes. Count the blinks that occur once, after switch the TV On by its front panel power switch. Check it.

Jan 02, 2013 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony trinitron 32 inch television model no. KV-32FS13 doesnt have any video nor audio and standby light just blinks about 4 times


Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check for any loose sodering points at the vertical output section.

Mar 27, 2012 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

The tv picture cuts out to a pink screen then back on again


Likely it is damage on the power supply and/or standby power supply.

Mar 20, 2012 | Sylvania LC420SS8 LCD TV

1 Answer

Rca 32 rca 32


The repair of this problem will be near to or exceed the cost to replace it with a new flat screen. With TV prices at an all time low due to slack demand it is not cost conscious to repair it.

Jan 24, 2012 | RCA F32650 32" TV

1 Answer

My tv is RCA 20B500T by pressing wrong buttons in the menu it was set standby mode and now i can't turn on it How can i change the stanby mode to normal mode?


Unplug the TV, wait about 5 minutes, plug it again. This should overwrite the standby mode. Read the manual if you have one.

Nov 02, 2010 | RCA Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71635 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...