Question about Printers & Copiers

1 Answer

Gestetner Destktop 2412Z Copier displaying error code: UF. What does it mean and how to resolve or clear it? The copier can initialize when I turn on the popwer but cannot copy due to error. I carried out simulation 02 and I was able to print several copies but when I lleave simulation. UF displays again. I'd checked the developer powder and found out that it's running out. Does it have something to do with the error? I'll appreciate any help or assistance you will extend to me.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

Disposal is full or door switch.

Posted on Mar 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the reset for error code E000004-0010?


This is fixing error code. The E004 is heater has failed - this usually last the life of the copier. The 0010 part is that the copier was turned off without resetting the error not a problem to reset. After resetting the error, fire up the copier and write down the error as displayed if it comes back. The sub code is very important to correct the problem. Some codes mean you have to replace the fixing heater power supply or the DC Controller. This is how you reset the code: Press the additional function key, then press the 2 & 8 keys at the same time, then the additional function key again. Press copier, function ( across the top of display ), CLEAR, ERR, then OK. Turn off copier and power back up. If the error happens again you may have a major problem that a tech may have to resolve. Good Luck.

Nov 02, 2010 | Canon imageRUNNER 5570 Copier

4 Answers

Gestetner 2822 error code e-5


i got a strait black thin line on left marging of paper. i think margin setting of my Gestetner 2822 has been changed. but i don't know how to fix this problem. (107-C, ???)

Nov 11, 2009 | Gestetner DSm645 Digital Imaging System

2 Answers

I have gestetner 2722ztd copier when i replace the explosure lap the copier dispalys error code e1 on the screen .how i clean/remove the error massege ? please help me


Please check after replace the continuity the expo lamp,expo thermofuse.The E codes are displayed in the copy counter.To display both digits of the E codes press the enter key.
E 11 - Exposure lamp error.Possible cause: expo lamp open,expo thermofuse open,power supply defective,main board defective.
E 12 - Exposure lamp error.Posible cause:AC drive board defective,main board defective.
E 13 =Zero cross signal error.Possible cause:main board,power supply defective,zero cross line open or the conector on the main board is not conected correctly.
For reset turn ON/OFF the main switch unplugged wait 10sec and turn ON or:turn ON the main switch,turn DIP switch 101-1 ON/OFF and turn the main switch OFF/ON.The DIP switch is located in the rear parts into the main board.

Sep 20, 2009 | Gestetner Printers & Copiers

1 Answer

How can reset fixing error for gestetner copier


The Gestetner and Infotec copiers is based the RICOH.Please try the Ricoh sercice enter code (press total clear key(yellow) -1-0-7 and press and hold down the C key more 4 second.Eneter in the service mode and turn OFF the copiers,unplugged the cords.Wait 10 sec.amd plug in the cords and turn ON the power switch.If is not good the 107 code try 104 or 102.

Aug 19, 2009 | Gestetner Printers & Copiers

1 Answer

We have a gestetner DSm622sp we are getting an error code SC320.


Hello sir; the error code you have display, that's means laser motor don't work, replace it!

May 18, 2009 | Gestetner DSm515pfd Digital Copier -...

3 Answers

Gestetner-2412Z copier-error code UF


UF is a panasonic code,the u means user fix.If you have an users guide it will tell u what to do.

Mar 03, 2008 | Gestetner DSm515pfd Digital Copier -...

1 Answer

ERROR UF-


I can help you, but what kind of copier is it? What make and model?

Mar 02, 2008 | Printers & Copiers

1 Answer

Gestetner-2412Z copier-error code UF


The large tray on the right is where the jam is. Slide the lever to the right and disconnect it from the machine. Open the cover as if you where filling it with paper. Look inside for and half sheets of paper, or possibly misloaded paper. If everything is ok, the front cover by the lever needs to come off. There are 2 screws on the bottom of the cover. Take the cover off, and then take the upper cover off. Underneath it is a switch. See if there is a piece of paper wedged in it. If so, remove it. Replace covers. If that does not solve the problem, then it probably needs feed rollers. You might be able to clean them with soap and water, but it will jam again in time.

Mar 01, 2008 | Ricoh Aficio 450 Copier

1 Answer

UF Error code-Gestetner 2412Z


You may find it easier to solve the problem by asking the same question under its original manufacturer model........Mita DC1257

Good luck

Mar 01, 2008 | Ricoh Aficio 450 Copier

1 Answer

Error Code: UF


failure of data transfer between boards.-or defective of backup battery.cofirm good connector pluging and good soldering points in boads.

Feb 29, 2008 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...