Question about Projection Televisions

1 Answer

Sony 46"lcd tv x series

I have a current model Sony 46" x series LCD digital tv, that has stopped working. The red light is flashing 10 times.
Does anyone know what this means?
Tanya

Posted by on

  • tanya000 Mar 19, 2008

    It is a KDL 46X3100, it is an Australian model

    Thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

Can you please post the exact model number from the back. The 10 blinks is an indicator of the probelm circuit, but is specific to the model number. I can provide more details once I have the model.
Thanks,
Dan

Posted on Mar 19, 2008

  • ABRsvcs Mar 20, 2008

    I don't have listings for Austrailian models. I did find that for many of the KDL series, 10 blinks indicates a problem with the "D" board. Look for bad solder joints on this module first. I'll make some additional inquiries and try to get more info.

    Dan

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have sony lcd hd ready 50inch rear projector tv model number KDF-E50A12U tv comes on after couple minuets tv clicks off to stand by then red light in stand by flashs 3 times gos back to green repets


Hello
Three blinks of standby light to Sony TVs indicates that the regulated voltage output from power regulator board is above thatn normal. The problem is with its power supply regulator board. Replace all the electrolytic cpacitors on that board with new ones. Replace all of them including small and large ones, at one time. OK.

Feb 04, 2012 | Projection Televisions

1 Answer

Sony LCD Model KF-60WE610 lamp was replaced and then it shortly after stopped turning on. Blinks Green 6 times then Red 6 times Please help!


For Sony Model KF-60WE610, KF-50WE610, and KF-42WE610, the Diagnostic Code of power light indicator flashing 6 times green, then flashing 6 times red (6 red etc), means you need to replace part number A-1302-272A G1 BOARD, COMPLETE. See Sony Service Manual, 4. Chasis-1 at part Ref no. 103. The Power Board sits vertically in two slots on the left side of the electronics board. 4 wire connectors to remove when replacing. This component fits all 3 KF models listed above.

Jun 22, 2011 | Sony Grand WEGA KF60WE610 60" Rear...

2 Answers

The television will not turn on. Initially, when the remote (or button on tv) was used you would hear it turn on and hear some volume and then it would turn itself off. A red light would flash, stop...


You did not specify the brand and model of your tv but based on experience the red light indicator flashing means a projection lamp problem. Check the lamp and lamp doors if properly secured. If symptom persist you need to replace the lamp.

Aug 10, 2009 | Projection Televisions

1 Answer

Tv comes on and goes off in about 15 seconds. red


Brand, Model, is it an LCD, Plasma, or Projection TV?

May 11, 2009 | Sony Grand WEGA KDF-50WE655 50" Rear...

1 Answer

No picture or sound


3 times error shows that lamp is not installed properly or lamp cover is off / not fixed.

If you replaced TV lamp recently then check lamp cover and make sure to seat it properly.
Need further info, let me know.

Jan 15, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Sony 42in- No picture or sound


You need to replace the bulb...very easy. You can do it yourself.

Dec 23, 2008 | Sony Grand WEGA KDF-60WF655 60" Rear...

2 Answers

Sony KDF-46E2000 LCD Projection TV


4 flashes is a bad fan, 3 flashes is lamp door switch

Jun 29, 2008 | Sony Grand WEGA KDF-55WF655 36" Rear...

1 Answer

My Sony Wega 60 LCD (model # KDF_60XS955)


below the lamp is a thermal fuse that has opened
Sony Part Number: 191002393
https://www.vancebaldwin.com has them in stock
thanks
scott

May 30, 2008 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Sony WEGA LCD TV Model KFE50A10 wont turn on


It turns out that the number of red lights flashing, relates to a partiuclar error problem. My TV was flashing 4 red lights, pausing , then flashing again etc etc. This particular error meant that one of the five fans within the TV box had stopped funtioning. So the TV has gone to the repairman today. I was advised by an operator at the SONY STYLE CENTRE that such a repair would be considered as a genuine fault and that SONY would pick up the tab. I live in hope

Apr 01, 2008 | Projection Televisions

2 Answers

Sony KF-WE50


my front panel sound is not working.......?
how i can do this.?

Jan 05, 2008 | Sony Grand WEGA KF-50WE620 Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...