Question about Zenith C27A24T 27" TV

4 Answers

Zenith Concierge hotel tv wont work with my xbox 360

I only have 4 pugs in the back. one for cable, one for audio in video in and speaker out. I plugged the A/V cables in but cant get the tv to show the game. If I try to change the channel manuelly threw the tv then its locked on channel 3 but if i use the remote i can change channel. The remote or tv dont seem to have any tv/video buttons or any menu options. just caption and the remote has a, b, and c for the hotel. Does any one have any suggestions?

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

There may be a door in the front of the ste that is locked. You could take off the back and see if there are any circuit boards attached to the front of the ste and then that would show you where the door would be. Sometimes they losck the door with tabs on the inside and has to be pryed off.

Posted on Mar 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 574 Answers

I doubt the TV even has a tuner if it is designed for a hotel. It may be a "dumb" receiver, nothing else. Do to channel 2 and then press the down arrow for channel, does it flip to 138 or AV1?

Posted on Mar 20, 2008

If you purchase a name-brand programmable remote with an
A/V (source) button you should be able to switch from tv tuner
to aux. I would suggest that your remote also have a menu
feature too as most hotel/motel sets cannot be adjusted at
the set. Also, you may want to get a Y-plug to hook your two
RCA audio cables into to adapt to the single audio input on
the tv.
Hope this is of some help,
CaseyBee

Posted on Mar 24, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

You have to have a installers remote to access anything thats not programmed in the unit now. now if you have the installer/programmers remote you may be able to take it out of hotel mode and put it in normal mode

Posted on Mar 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can I do a Factory default reset on a Zenith Concierge Series H2530Y7 Model Television without the remote control?


ZENITH SC652 Concierge Commercial TV Remote Control buy a master remote then,

  • Press the "Power" button on the Installer's remote control to turn on the TV.
  • 2 Press and hold down the "Menu" button on the remote for about six seconds until the menu disappears.
  • 3 Press the "9," "8," "7," "6" and "CC" buttons in succession. This resets the TV to factory default settings


  • Read more : http://www.ehow.com/how_7393497_reset-zenith-concierge-television.html

    Apr 24, 2015 | Zenith Standard (CRT) Televisions

    1 Answer

    How do I hook up a x box to it.


    What kind of connector do you have with the xBox? see:

    http://support.xbox.com/en-US/xbox-360/audio-video-setup-and-use/connect-xbox-360-console-tv



    You'll need any but the top HDMI as your TV does not have that capability:
    http://www.manualslib.com/manual/341796/Zenith-C27v22.html?page=6#manual

    Jan 16, 2013 | Zenith C32V22 32" TV

    1 Answer

    I cannot reset the channels on my TV. It is the Concierge TV from a hotel. Will I need to buy a Zenith Remote from the store to do the channel programming. It says it is locked


    You have a hotel/motel model that cannot be programmed or any of the settings changed without a special Master remote. Sorry, doubt that you can buy one from the store, they are not sold to the public. Contact the hotel where you bought the set and try to get the model number for the remote from them. This is a different number than the model number of your tv.

    Dec 13, 2008 | Zenith C27A24T 27" TV

    1 Answer

    My tv wont let me auto program the channels


    if you can get to menu to unlock the channels type in 0000 or 1234 or 9999 or 0001 orif this doesnt work you could take back off tv and remove the little battery that looks like a coin out. becareful, this is high voltage in there.........

    Dec 13, 2008 | Zenith C27A24T 27" TV

    1 Answer

    My tv is locked


    They have an internal battery for transport between rooms so as not to lose any pre-programed channels or info while unplugged. So to beat this you will have to unplug it for a few days and let it clear its memory. Mine needed almost a week but when its turned on after the right amount of time it will ask to do a channel search. So make sure you have it hooked up to cable before running that search or you will have to repeat the previous steps. Hope this helps.

    Dec 13, 2008 | Zenith C27A24T 27" TV

    3 Answers

    Zenith Concierge H25W35DT 27"


    The CORRECT answer is you must purchase a LP702 remote. Google it to find one to buy. You must unlock channels and program the channels fresh.
    Some standard zenith remotes allow you to reset the tv by popping off the cover of the remote and pressing an unmarked button.

    Mar 09, 2008 | Zenith C27A24T 27" TV

    10 Answers

    Concierge by Zenith Input Problems.


    I had the same tv at my motel and wanted to hook up my Wii. Turning to Channel 999 worked.

    Jan 17, 2008 | Zenith C27A24T 27" TV

    1 Answer

    Concierge series 25" wont stay on channel 3


    You have to have the original remote. Then go into the menu under channel set-up. punch in channel 3 press add. The punch in channl 52. then press delete. Or turn on the cable box and go to auto tunnin g and let it do its thing. Im sorry , but if you dont have the original remote with a menu button your going to have to live with your problem. Good Luck

    Jul 30, 2006 | Zenith C27A24T 27" TV

    Not finding what you are looking for?
    Zenith C27A24T 27" TV Logo

    2,462 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Zenith Standard (CRT) Televisions Experts

    The Knight
    The Knight

    Level 3 Expert

    68202 Answers

    matt martin
    matt martin

    Level 3 Expert

    1191 Answers

    Anastasio Benjou

    Level 2 Expert

    99 Answers

    Are you a Zenith Standard (CRT) Television Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...