Question about Frigidaire ATF6000ES Front Load Washer
Washer stopped mid-cycle. No buttons work to restart or clear cycle, but pressing any button returns 3 beeps and ERR in the display which alternates with "45", which I believe is the time left in the current cycle.. No other error codes display. Unplugged for an extended period of time (10 min) did nothing. This Frigidaire Affinity ATF6000ES front loader is less than 2 years old.
IF there is an E attached to the 45, it is your control board and the control board would need to be replaced. This is per the "Washer Tech Data Sheet"Hope that helps...
Posted on Jun 19, 2008
Tips for a great answer:
Hello Mary Fortner - It means that the washer has been paused; the cycle has been interrupted. Either the "Pause/Cancel" button or "Start/Pause" button has been pressed. To resume wash - press "Pause/Cancel" or "Start/Pause" once. If this does not prove to be successful please turn the breaker to the unit off for 5 minutes. Then turn the breaker back on to the unit, and retry the cycle setting again.
Dec 11, 2012 | Frigidaire Affinity ATF7000E Front Load...
Dec 13, 2009 | Frigidaire ATF6000ES Front Load Washer
Oct 20, 2009 | Frigidaire Affinity ATF6000ES 3.5 Cu. Ft....
Sep 19, 2009 | Frigidaire Affinity ATF6000ES 3.5 Cu. Ft....
May 11, 2009 | Frigidaire Affinity ATF6000ES 3.5 Cu. Ft....
Feb 22, 2009 | Frigidaire ATF6000ES Front Load Washer
Feb 21, 2009 | Frigidaire ATF6000ES Front Load Washer
May 19, 2008 | Frigidaire ATF6000ES Front Load Washer
1,158 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: