- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
what manual i have one i have no manual turn on head set by holding power button when paired with phone,come on it can't browse your phone for numbers the side buttons are for volume if you press the power button two times you will dial the last caller or you may be able if you have set your voice commands if you are paired but not connected you can press power button once and it should connect
Go to ur phones bluetooth settings - activate pair new device - at the same time press and hold the on button on your blue tooth head set for about 10-15 seconds - this will enter the device into pair mode - on your phone - click on pair with new device etc etc, the default access code is either 0000 or 1234
If you have lost the pairing on your phone with the headset follow these simple steps below: • Setting the headset into pairing mode 1) Ensure the headset is fully charged 2) The headset must be switch off 3) Press and hold the on button for +- 8 seconds until the light flashes red-blue 4) The headset is now in pairing mode • Searching for the headset on the phone 1) Go to “settings” or “connections” 2) Select Bluetooth, then options 3) Select Devices and click add 4) The phone should search for any available Bluetooth devices and display what was found 5) Select the Explorer 3XX device and click add 6) You will be required to enter in a pass code which is standard ‘0000’ 7) If successful then the headset will start flashing BLUE every few seconds. 8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device. • The headset is now paired with the phone
Here is the problem, what most of the people do with this LG HBM 550 is press the PWR/END button on the headsent and when the headset light turn on Blue they let the button go and try to pair the device, this is worng when light is flshing Blue only it is not in the pairing mode.
You need to press and hold the button on the head set for five second and when the light flicker red and blue alternately, now device is in the paring mode.
Using you phone when to pair this device it might ask, depending on you r phone setting for the PIN or pass code which will be "0000"
Try ,,good luck
SIEMENS HEAD SET MANUAL
TO PAIR YOUR SEMENS HEAD SET TO A NEW PHONE YOU HAVE TO PUT IT IN TO BLUETOOTH SCAN MODE THIS ALOWS YOU TO FIND THE HEAD SET WHENYOU SCAN FOR NEW DEVICES.
TO ENTER BLUETOOTH SCAN MODE PRESS (MUTE AND VOL+) AT THE SAME TIME FOR 5-10 SECONDS , THE LED SHOULD NOW BE A SEADY GREEN LIGHT.
SCAN FOR BLUETOOTH DEVICES ON YOUR MOBILE YOU WILL FIND HHB 610 SELECT TO PAIR THEN ENTER 0000 AS PASSWORD .YOU ARE NOW READY TO USE.
SYSTEM RESET PRESS (MUTE AND PHONE) AT SAME TIME FOR 5-10 SECONDS THE LED WILL FLASH RED/GREEN FOR ABOUT 5 SECONDS SYSTEM HAS NOW RESET.