I have an ELNA 7000 sewing machine which had no problem sewing yesterday. Today I tried to sew on it but the fabric feeder will not rise high enough to feed the fabric and is sitting sewing in one spot - can you PUHLEASE help??? What could be the cause of this???
If you bend over the front of the machine, you will see a slider switch on the back of the machine, and there is a small "button" at the bottom right of the switch (your right). If you push this button down, you can slide the slider switch to your right and the feed dogs will go up.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Colin, I'm Julie. The noise you're experiencing could be caused by one of the following
"1) Dust/Lint in the feed dog_________Clean machine
2) Lint in the hook_________________Clean machine
3) Thread caught in the hook________Disassemble hook and clean"
sorry, not sure I understand your problem. can you elaborate?
Have you got the correct Elna bobbin for your machine? check your manual, it should have an image of the bobbin, the 7000 was one of the last Swiss made Elnas and although a computerised machine, it still tool the Elna metal bobbin with 7 holes on one side only. If you are using another bobbin in the shuttle, it may not function correctly.
if you can add some more info I will try to help you further.
hello, I don't know if you have found a manual yet, but I have the elna 7000 and it's manual.I could copy mages and send as an attachment as a last resort for you. I am giving the machine and all its many books to my daughter in law,