Question about Logitech Harmony 1000 LCD Touchscreen Remote Control

3 Answers

No display the display screen is blank no menu or anything is on just lighted back round

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

The contrast of the LCD screen can be adjusted by pressing either the CHANNEL UP or DOWN button while holding down the MAIN button. Release the buttons when you reached the optimal level of contrast.

Posted on Mar 18, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 201 Answers

Hey there printerguy08, you either have a low battery or the lcd is damaged.Plug the USB connection to your computer. If the power goes to your remote, then replace or charge your batteries. If the LCD does not activate when connected to the computer, then there is a hardware issue with the remote screen. It should be returned or brought to a service center. Good Luck!

Posted on Mar 18, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,944 Answers

Hi,

Do you mean that only the backlight turns on?

Posted on Mar 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The LCD screen is not functioning...it is blank. What steps do I need to take to fix the problem?


If it works functionally, but there is only no screen, the back light inverter board should be checked. To get more details, http://electronicshelponline.blogspot.com/

Nov 28, 2013 | Empire Comfort Systems Empire...

1 Answer

My RTI m2(?) fell off the table to the floor. The black cover dislodged and the screen also dislodged. It was still lit. When I replaced the screen the icons were lit with a pink band across the bottom of...


Sorry this remote can't be repair it is garbage,because the small display LCD screen panel it have mircro cracks and fractures in them and leaking chemicals radiation that why u able pink chemicals band across the the small display LCD screen panel.It time to buy another remote.

Sep 06, 2011 | Rti Technologies Rti T1 Remote Control

1 Answer

Remote control not working with tv


The remote control is an acess to the TV device for example only from a distance. A remote controll for functionality would require to insert batteries a power source making possible communiction with devices requiring reception transmittion of signals. The remote is handheld pointed to the direction of TV requiring signal before button pressed woudl achieve response. a common button to start the remote control experience is pressing on the power button, that displays a signal on the TV. The TV should momentarily produce a sound and lighting effect,, and displaying on the dark screen a light blue screen. The initial signal response from remote control to TV indicates devices are functioning as required. Additional buttons on the remote controll could perform functions of several available.
The remote control has master button, menu on which every additional function is deriveable. Once the menu button is pressed with remote pointed in the direction of TV, should dicplay a list of options on the blue screen already established by power button. Every additional remote control device functionality is achievable by only after the first two buttons have been powered and pressed to display option results on a screen of TV. The remote controll buttons remaining perform complementary functionalities. For example, the arrow keys on remote control make movement of the options displayed on the screen, where a comfrimation button or identified as select allows to confirm remote functions displayed on the screen. A remote control could have several functionalities only accessible once made to display in screen. The three most common buttons on a remote control are First power button that powers on the TV, menu button that displays a list of functionalities on the powered on bl;ank blue screen, and using the arrow buttons on the remote would moves an indicator arround the screen area options. The selection button makes confrimation of the option.

Dec 02, 2010 | Philips Remote Controls

1 Answer

Screen display not activated, no display except light background


HI! Here's what to do if your Logitech Harmony remote's LCD screen has gone blank.

1. Remove the battery, press and hold the 'OFF' button, and re-insert the battery. The screen will display 'Safe Mode!', or the 'Activities' button will be lit.

2. Connect your remote to the computer.

3. Launch the Harmony Remote Software, and log in.

4. Click "Downloads" at the top and click "Firmware".

5. The remote will go through the firmware update.

6. Select "Yes", and click NEXT to update the remote.


If the screen is still blank after you complete these steps, then it is a hardware issue and you should contact Logitech's wonderful support team, given that the remote is still under warranty.

Dec 20, 2009 | Logitech Harmony 525 LCD Remote Control

1 Answer

Blank screen and


This is a first suggestion, but I would try taking the battery out and putting it back in after 10 seconds.

Dec 09, 2009 | Logitech Harmony 900 Remote Control

1 Answer

Harmony 890 Screen lights up but no text shows, its just blank


HI! Here's what to do if your Logitech Harmony remote's LCD screen has gone blank.


1. Remove the battery, press and hold the 'OFF' button, and re-insert the battery. The screen will display 'Safe Mode!', or the 'Activities' button will be lit.

2. Connect your remote to the computer.

3. Launch the Harmony Remote Software, and log in.

4. Click "Downloads" at the top and click "Firmware".

5. The remote will go through the firmware update.

6. Select "Yes", and click NEXT to update the remote.


If the screen is still blank after you complete these steps, then it is a hardware issue and you should contact Logitech's wonderful support team, given that the remote is still under warranty.

Oct 22, 2009 | Logitech Harmony 890 LCD Remote Control

1 Answer

Touch screen display broken


HI! Here's what to do if your Logitech Harmony remote's LCD screen has gone blank.


1. Remove the battery, press and hold the 'OFF' button, and re-insert the battery. The screen will display 'Safe Mode!', or the 'Activities' button will be lit.

2. Connect your remote to the computer.

3. Launch the Harmony Remote Software, and log in.

4. Click "Downloads" at the top and click "Firmware".

5. The remote will go through the firmware update.

6. Select "Yes", and click NEXT to update the remote.



If the screen is still blank after you complete these steps, then it is a hardware issue and you should contact Logitech's wonderful support team, given that the remote is still under warranty. If you are not in warranty, Logitech does not provide repair services for Harmony products.


Hope that helps.
-D

Aug 26, 2009 | Logitech Harmony One Advanced Universal...

1 Answer

Ewaynuworld: Remote works but blue screen does not show anything anymore. Right now I'm able to use remote because I remember the buttons (no words show at all).


HI! Here's what to do if your Logitech Harmony remote's LCD screen has gone blank.

1. Remove the battery, press and hold the 'OFF' button, and re-insert the battery. The screen will display 'Safe Mode!', or the 'Activities' button will be lit.

2. Connect your remote to the computer.

3. Launch the Harmony Remote Software, and log in.

4. Click "Downloads" at the top and click "Firmware".

5. The remote will go through the firmware update.
6. Select "Yes", and click NEXT to update the remote.



If the screen is still blank after you complete these steps, then it is a hardware issue and you should contact Logitech's wonderful support team, given that the remote is still under warranty.

Aug 03, 2009 | Logitech Harmony 550 Remote Control

9 Answers

LCD Screen is blank


Had the same thing:
Step 1 - remove the battery for about 60 minutes. There seems to be a little energy store in the unit and just taking out the battery, counting to 10, and reinstalling it does not work.

Step 2- Do a software update upgrade from the Logitech site. The new firmware level seems to have fixed the base problem.

If you just take the battery out and put it in, it does not work.
If you take the battery out and just hook it up to do a software upgrade, it does not work becuase the remote gets power from the USB commenction so it remains "hung"

The most disturbing thing about the whole event for me was the number of people that had the problem occur about 12 months and 1 day after purchase....ie when it was out of warranty!!!

Oct 20, 2007 | Logitech Harmony 890 LCD Remote Control

Not finding what you are looking for?
Logitech Harmony 1000 LCD Touchscreen Remote Control Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Remote Controls Experts

bill tarkulich

Level 1 Expert

33 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

netbot

Level 1 Expert

2 Answers

Are you a Logitech Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...