a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You can download the driver for your printer on Hp's website located at www.hp.com. click on support and then download software/drivers. Enter the name and model of your printer and find the file made for your version of windows. Then just follow the prompts to download and then install the printer. Make sure not to donnect the usb cable again until the install prompts you to do so. Once the driver is installed, the pc will recognize the printer when the usb cable is connected.
Windows 7 print driver available LaserJet model specific printer drivers are currently available within the Windows 7 operating system. Installation of these drivers can be performed via Devices and Printers , formerly known as the Add Printer Wizard . NOTE: If the model specific driver that you are looking for does not appear in the list of available printers, clicking the Windows Update button underneath the list of available printers may provide additional drivers to choose from. Requires opt-in to Microsoft Windows Update and internet connection.
It can be done tested by Thoo personally 6L printer prints well on vista too The printer end should be connected to 25 pin parallel cable, converted to the USB on the notebook end of the wiring To solve your printing problems locate vista driver, since i have tested vista works fine on HP 6L printers make sure you select the correct O/S and assign in to the USB virtual port 05 http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=14974&lang=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=18972&prodSeriesId=25476 After installing my vista can print perfectly well on test printout Advise from http://www.bebo.com/andythoo Technical support specialist: Thoo Wai Kiat
Power OFF both Printer AND Computer.
Boot up computer.
Insert the USB cable into a port.
WIN XP will recognize and install needed software.
Attached the USB cord to the printer.
Power up the Printer
Next configure the Printer . . . øStart > Settings > Printers and Faxes øRight-click on HP LaserJet 6L øProperties øPorts oFind “USB001Virtual printer port for USB" oSelect this, if not already done oApply
Use any printer parallel 25pin convertor to USB cable and connect it to pc or notebook Connect both ends from pc to 6L printer Go to website to choose the correct O/S driver for installation http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=14974&lang=en&cc=us&taskId=135&prodClassId=-1&prodTypeId=18972&prodSeriesId=25476 Use virtual USB port005 for printer 6L Bi-directional option can be ticked Click apply and ok Unplug and replug the USB cable Try printing a test page,
I have tried it, the vista download drivers works on vista, no problems in printing at all, advise from http://www.bebo.com/andythoo
Get it cleaned in paper sensor area and check up the drivers as well as data cable which connects, the pc and printer. Change the data cable if necessary. Give me feedback so that may be some more help can be provided.
Laserjet 1022 printe supports printing through the Laserjet 6L drivers and its tested, please select the same USB port for the Laserjet 1022 printer which is selected for the Laserjet 6L printer and then try printing.