Question about Projection Televisions

1 Answer

We have a Samsung HLP5674WX/XAA which seems to have a mind of it's own. It will automatically shut off or when we turn it own, there will be no picture with sound or once it turns on, the TV will shut itself off. Please help.

Posted by on

  • Anonymous Aug 06, 2008

    my tv HLS4676S automatically turns itself off, some time after a couple of hours and others after 1/2hr. I noticed the red standby mode light flashing when this happens but the tv doesn't come back on until I physically turn it on myself.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Samsung HLP5474WX/XAA. The ballast was replace 2 months ago. I just installed the lamp, i notice green flashing occur on the LAMP when i turn it on. The tv takes 10 to 15 second to turn on the picture, the sound as soon as i power up i can hear it. Any advice??

Posted on Dec 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there more than 1 fan in a samsung hlp4663wx xaa tv ?


yes....2....lamp and dmd board....one is behind lamp and other is on front of dmd board

Feb 05, 2013 | Projection Televisions

1 Answer

Need a manual


samsung.com has the manuals for most if not all their tvs.

Free to download

Jan 26, 2013 | Samsung HLP5674WX

2 Answers

Replace Samsung HLP5674WX/XAA color wheel


REmove the screws that secure the light engine ( right side looking in the rear. Then slide the light engine part way out and you will see the color wheel housing which has two screws that secure it remove the two screws and ubplug the two wires from the color whell the old color whell pops out and install the new one and reverse the steps.

Oct 29, 2012 | Samsung HLP5674W 56" Rear Projection...

1 Answer

Samsung hls4266wx/xaa tv. tv stays on for a minute, then shuts down Timer lamp flashes and temp standby


I put a lamp in to my Samsung HLS4266WX/XAA, but when I actually took it apart for the Bulb replacement which I have done twice now. I found where that switch is, that gets pressed when you have the back cover to the bulb screwed in was hanging, and I can get the new bulb and my replacement bulb to work for about 15 secs, and at one point it was working really good. Can anyone help me with this problem, cause Im getting frustrated. It seems like a simple fix,but its almost like the bulb I ordered is not as good as my other replacement bulb.Its from MWAVE.com, anyone heard anything about this company? Please help if you can, id really appreciate it.

Joe Red

May 21, 2011 | Samsung HLS4266 TV

1 Answer

I have the Samsung HLP5674WX/XAA Rear Projection TV and last night the lamp went out. I did research and found out that I could replace myself. I was able to get the lamp out and afterwards decided to take...


hello am rico , no can not bypass it, you reopen the tv make sure its press it in, otherwise tv wont come on , untill the sensor is push in correctly. if you need more help, feel free to call me at anytime. 602-810-7149.



Jan 07, 2011 | Samsung HLP5674W 56" Rear Projection...

1 Answer

Samsung HLP5674WX color went out


Have you not inadvertently pressed S Video / S VHS or put it into RGB by mistake?? Try various inputs just in case it`s a bad socket. You can usually switch different sockets into different modes, It`s definitely worth checking these first. Is the scart lead in the back not loose?? It`s got nothing to do with the lamp or display, It sounds like a button may have been pressed or the uPC has thrown a wobbly. Try unplugging from the mains to reboot the set. I hope this is helpful. Ian

Jul 29, 2009 | Samsung Projection Televisions

1 Answer

Samsung shuts off automatically


Check air vents around cabinet. Suggests over heating and shutting down due to thermal switch. Clean vents and fan inlet

Jun 27, 2009 | Samsung Projection Televisions

2 Answers

Tv shuts itself off


Look for the computer processor inside the TV. It needs to be cleaned. A can of compressed air will work. The processor is overheating and causing the tv to shut off. Look for the small fan that is supposed to keep the processor cool then remove the dust.

Good luck!

Oct 22, 2008 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

Television hlp5063wx/xaa model No


This is very common in Samsung DLPs. The DMD board may be going bad or it could be one of the fans that cool the engine while it is running is going bad (even though the fan looks like it is running, it is not running fast enough to cool the engine). Just before it shuts down your picture should read at the bottom of your screen which fan is bad. But I have found that does not alway happen.

Mar 22, 2008 | Samsung HCM4215W 42" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

777 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...