Canon Pixma mp800 printer will not print

Step by Step troubleshooting canon pixma MP800 error code 6A00
The Problem Canon PIXMA MP800 Error 6A00

1. The print head cartridge keeps locking itself up on the right hand side.
2. Frequent 5100 errors even when the printer is on standby
3. Even when I wipe up the print cartridge, the next print will
mess up the bottom of the print cartridge with ink again.

Step for troubleshooting canon pixma MP800

1. Opening the cover and wait for ink carriage to center
2. Pull out power cord
3. Pushed carriage to far left (should slide easily)
4. Used paper towel and wiped purge unit a lot of times
(press down to soak paper towel with ink). Repeat until the paper towel is relatively clear.
5. Used diluted napisan (oxygen-based cleaning agent in the
ratio of 1:3 with powder:water) and soaked paper towel
6. Repeat step 4 with wet paper towel. Repeat until purge unit is near-white.
7. Pulled and pushed clear plastic wiper (north of purge unit) and wiped it down
8. Slided carriage back to original position
9. Removed Print head cartridge and wiped out excess ink stuck on bottom.

Step by Step troubleshooting canon pixma MP800 error code 6A00
The Problem Canon PIXMA MP800 Error 6A00
1. The print head cartridge keeps locking itself up on the right hand side.
2. Frequent 5100 errors even when the printer is on standby
3. Even when I wipe up the print cartridge, the next print will
mess up the bottom of the print cartridge with ink again.
Step for troubleshooting canon pixma MP800
1. Opening the cover and wait for ink carriage to center
2. Pull out power cord
3. Pushed carriage to far left (should slide easily)
4. Used paper towel and wiped purge unit a lot of times
(press down to soak paper towel with ink). Repeat until the paper towel is relatively clear.
5. Used diluted napisan (oxygen-based cleaning agent in the
ratio of 1:3 with powder:water) and soaked paper towel
6. Repeat step 4 with wet paper towel. Repeat until purge unit is near-white.
7. Pulled and pushed clear plastic wiper (north of purge unit) and wiped it down
8. Slided carriage back to original position
9. Removed Print head cartridge and wiped out excess ink stuck on bottom.
Hope this helps.

The Problem Canon PIXMA MP800 Error 6A00
1. The print head cartridge keeps locking itself up on the right hand side.
2. Frequent 5100 errors even when the printer is on standby
3. Even when I wipe up the print cartridge, the next print will
mess up the bottom of the print cartridge with ink again.
Step for troubleshooting canon pixma MP800
1. Opening the cover and wait for ink carriage to center
2. Pull out power cord
3. Pushed carriage to far left (should slide easily)
4. Used paper towel and wiped purge unit a lot of times
(press down to soak paper towel with ink). Repeat until the paper towel is relatively clear.
5. Used diluted napisan (oxygen-based cleaning agent in the
ratio of 1:3 with powder:water) and soaked paper towel
6. Repeat step 4 with wet paper towel. Repeat until purge unit is near-white.
7. Pulled and pushed clear plastic wiper (north of purge unit) and wiped it down
8. Slided carriage back to original position
9. Removed Print head cartridge and wiped out excess ink stuck on bottom.

The small black tank is called "Photo Black Ink Cartridge" and is usually only sed when printing color pages or photos. There is no way to bypass that. Use the ********* ink since it is a cheaper cartridge judging by volume. Sets can be purchased on ebay for very low price. Link below:
7 BLACK Printer Ink with chip fits Canon PGI 5 MP600 MP800 MP830 MX850 eBay

If you need further help, I’m available over the phone at https://www.6ya.com/expert/alex_22751bbefa74c3d0

no you cant print with emapty colour catridges you have to install the other full catridges.

1. Clean The Print Head Nozzles (Mac OS X) MP500 / MP800 2. Clean The Print Head Nozzles (Windows) MP500 / MP800 3. Confirm that the recommended ink tanks are installed properly MP500 / MP800 4. Install recommended ink tanks in the correct order MP500 / MP530 / MP800 / MP800R / MP830 5. Perform A Manual Print Head Alignment (Mac OS X) MP500 / MP800 / MP950 6. Perform A Manual Print Head Alignment (Windows) MP500 / MP800 / MP950 7. Perform the print head cleaning procedure on MP500 / MP800 8. Print Head Alignment MP500 / MP800 / MP950 9. Remove tape from the MP500 / MP800 ink tank 10. Replace ink tank(s) MP500 / MP800

I hope it helps!!!

Try holding down the red reset button for > 5 seconds. This should get rid of the error by disengaging the ink level detector.

Hello,
Your cartridges are either empty or misalligned get them alligned in the maintainence option of printer settings of printer properties and go for cartridge cleaning also.
Regards,
Manoj Joseph
+91 9352008418

problem is when the printer does a head clean dumps large amount of black ink on to rollers. Replacement head is almost £100 and not certain to fix fault

hi clean your cartridges clean your cartridge head nozal with the printer software goto to start-> settings->printers and faxes-> select your printer->right click->properties->tools-> find options like clean cart or nozals.

check printer settings for best ,normal,or draft set as best and try. may helpful.