Question about Projection Televisions

1 Answer

Sanyo tv grainy image and off colors

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 871 Answers

Reception problems, fix your antenna. if still has the same problems, try adjusting tuning.

another post from you and same problem.

Posted on Mar 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My screen is a yellow green color with a grainy picture. The TV is about 4 years old and has never had the lamp replaced. Will replacing the lamp fix my TV?


Convergence it dead,Know how to solders?Buy a convergence kit,use what in that kit.Tries these websites for the kit,Tv repair World.com,Tv repair kits.

Nov 12, 2009 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

Distorted image and color separation and overlap


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} The best advice I can tell you at this point is to go to tvrepairkits.com and order the complete convergence kit for your model of TV set, no need to search and order multiple parts from different sources and pay multiple shipping fees! The kit comes with original Sanyo STK IC’S , not those cheap aftermarket or china made IC’S full pictorial directions, the thermal paste, resistors, the correct Pico fuses, AND free live on-Line tech assistance in case you run into a problem with the repair. They ship out 2 to 3 day Priority mail, the next day in most cases GOOD LUCK!!!
Larry Dillon, senior tech/tvrepairkits.com

Jul 05, 2009 | Pioneer SD-532HD5 53" Rear Projection...

2 Answers

Getting "red" double image


Your TV most likely has a Convergence Chip Failure ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg

2c07611.pngSolution #1

You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together convergence repair kits for most models.

The kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, etc. Everything you will need to do the repair yourself.

Apr 27, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Kp-46wt500 shadow and slanted images with rainbow colors


Here are some of the most common symptoms and example photos of a convergence problem

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg
Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.



You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

2c07611.pngSolution #1

You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick note and they will put one together for you. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, etc.

Mar 04, 2009 | Sony KP-46WT500 46" Rear Projection...

2 Answers

Double Image Red and Green


Here are some of the most common symptoms and example photos of a convergence problem

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg

Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.



You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.


2c07611.pngSolution


You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick email and they will put one together for you. Their kits includes photo instruction guides, original Sanyo STK chips, convergence resistors, pico fuses, etc.

Feb 08, 2009 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

PHILIPS 60PW936317 - COLORS GOT DISTORTED AS I WAS WATCHING TV


Your convergence chips and convergence resistors are going bad. When they fail the screen colors will look distorted/3d looking.  Another symptom is one or more colors can't be converged using the convergence menu. You can purchase the parts over the internet. Just make sure you get Sanyo brand convergence chips and the correct flame proof resistors. You can also check the site www.TvRepairKits.com. They are working on a complete kit for this model.

Nov 12, 2008 | Philips 60PP9202 60" Rear Projection...

1 Answer

Philips 46-inch Rear Projection with bowed image?? slight distortion



You have a convergence problem. Here are some of the most common symptoms. 

Screen looks 3D
One or more colors can't be adjusted when when using the convergence menu. 
Screen is bowed in but stationary.

Solution: 
You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kit for your exact model. The kit inlcludes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc. Everything you need to fix it yourself. Its an easy fix. 

Jul 02, 2008 | Philips 46PP9302 46" Rear Projection...

2 Answers

Grainy image off colors


I have gost images in other colors I need help it was built in 2003 do the bulbs need to be replaced?

Mar 18, 2008 | Samsung HCN473W 47" Rear Projection...

1 Answer

Color 27" Sanyo TV


You could use that HD receiver with that TV but you'll not get the quality of HD on the TV. You may notice some changes with the colors due to the more resolutions from you HD.

Jan 23, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...