Can you please tell me how to program this scale....no directions.
Thanks
[email protected]
To set
1. Push the set button, you will get ------
2. Push the user
3. Push set again the user number will blink 3 times and show 0.0
4. Get on the scale- when it shows your weight push the set button. This is your start weight
5. Then it will automatically take 10% and show your goal.
6. Push the set button again this will set the goal
To Weigh
1. Push the user number that you set up the P-? number will blink 3 times and show 0.0
2. Get on the scale it will show in this order
a. your weight now
b. your weight since the last time you weighed
c. The total loss toward this goal
d. Total needed to reach your goal
You can also change our goal weight if your goal is more or less than 10%.
To set
1. Push the set button, you will get ------
2. Push the user
3. Push set again the user number will blink 3 times and show 0.0
4. Get on the scale- when it shows your weight push the set button. This is your start weight. Get off the scale.
5. Then it will automatically take 10% and show your goal or You can now press P1 (increase) or P2 (decrease) to adjust your goal weight.
6. Push the set button again this will set the goal
8,233 views
Usually answered in minutes!
Don't know how to program it
don't know how to program and reset
I have no instructions for programming each user on this scale. can you help me?
i need to reset my scale howe do i do that
no directions or manual
I would love to know how to program this scale!!!
×