Question about DVD & Blu-Ray Players

1 Answer

I am connecting a Technika 1031 to a LG 19LS4D using a good quality scart. I get sound but no picture. Connecting via the Y, Pb/Cb and Pr/Cr ports does nothing. Am I doing something wrong?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

Make sure that the proper input is selected on the TV. Also, check to be sure that the correct output is activated on the DVD. I'm not familiar with the Technika brand so verify the output selection in the owner's manual.
If those selections are correct, try connecting to the standard AV input using the Red/White/Yel cable connection.
Dan

Posted on Mar 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why am i getting a pink cast when playing dvd discs?


Try changing your settings from RGB to Y Pb/Cb Pr/Cr. Its in the BD/DVD Video Output Format settings. Seems there has been a firmware bug and this is the current fix.

Aug 10, 2014 | Panasonic DMR-ES10 DVD Recorder

1 Answer

Dvd player only plays in b&w, and connectors dont seem to match up with tv


Go into the player's setup menu and make sure it's set for the kind of connection you're actually using (component, S-video, composite). Also make sure the connections are pushed "all-the-way-in" Lose connections can cause B&W picture.

Sep 09, 2007 | DVD & Blu-Ray Players

1 Answer

I have bought a new Blu-Ray player, a BDP-S570, which I am trying to connect to my LG TV. The TV is a 50PX4D and has one HDMI port that I have previously used to connect a Sky HD box to with excellent...


There are no compatibility issues. In your BluRays HDMI audio settings set the audio out to PCM instead of bit stream.The TV cannot decode digital bit stream audio.

May 16, 2011 | Sony BDP-S350 Blu-Ray Player

2 Answers

How to connect a dvd player to lcd tv


Your DVD player's output is Composite Video (the yellow connector) plus stereo audio (the red and white connectors, for right and left audio)

The inputs on your TV are for Component Video, which splits the video signal into three cables (Y for brightness, Pb and Pr for blue and red, respectively)

Check your TV to see if it has a composite input (single yellow connector, labeled "video" or "composite")

And be sure to let me know if this helps!

Oct 24, 2009 | DVD & Blu-Ray Players

1 Answer

Problem adding dvd to digital converter box/tv mix


tengo un control remoto universal sony RM-v210
por favor si save como progamarlo escribeme a rical2903@hotmail.com
gracias anticipada.....

Aug 02, 2009 | GPX D1816 DVD Player

1 Answer

No picture or sound


Dear friends,
Press and hold STOP button on front panel of the player more than 5 sec. The player reset after 5 sec.

Mar 11, 2009 | Cyberhome CH-DVD 300 DVD Player

1 Answer

What channel does tv need to be on to play dvd's


Hi and welcome to FixYa,

Depending on where you are and the standards/connections used, it could be:
  • Channel 3 or 4 (if using a single coaxial patch cord);
Other connection possibilities are:
  • AV, Video 1, AUX, Line 1 (if using composite yellow red & white RCA to RCA cables);
  • Component (if using component Y, Pb, Pr, red & white RCA to RCA cables).
  • SCART;
  • HDMI;
  • S-Video.
Perhaps you could post back what is used, what connectors are available at the rear of both the DVD player/TV.

Good luck and thank you for using FixYa.

Feb 14, 2009 | Samsung DVD-VR357

1 Answer

Monster Component Cable labled Y/Cb/CR to TV that has Input Y/Pb/Pr


Y PB PR is the analog version of the Y CB CR color space; the two are numerically equivalent, but Y PB PR is designed for use in analog systems whereas Y CB CR is intended for digital video.

Aug 31, 2008 | DVD & Blu-Ray Players

1 Answer

Trying to connect sony dvd player to hdtv


You will need some cables first. It's really not that difficult once you know what each cable does.

Since you're only connecting from the DVD player to a receiver, this should be simple.

There are 4 solutions depending on what cables you have.

Composite - Yellow, Red, and White ended connectors.
S-Video - Black 4-pin connectors.
Component - Green, Blue, Red and sometimes extra Red, White for audio.
HDMI - heavy cable with a wide/flat connector.

Composite connection - Connect the yellow end to the yellow Video Out of the DVD player and to the DVD Video In on the receiver. Connect the Red audio connector to the Red Audio out of the DVD player, the White connector to the White Audio out of the DVD player, and then connect those to the Red and White Ins for DVD Audio on the Receiver.

S-Video Connection - This is the same as the Composite video connection, but connect the black 4-pin cable into the S-Video out of the DVD player and into the In for DVD on the back of the receiver instead of using the yellow video cable. The S-Video cable is a video only cable and uses the same audio cables (the red and white ended cables) for audio.

Component Connection - On the back of the DVD player, connect the 3 video cables that are Red to Red, Blue to Blue, and Green to Green. These will be labeled Y for Green, Cb/Pb for Blue, and Cr/Pr for Red. Connect these video cables to the inputs of the receiver the same way Y for Green, Cb/Pb for Blue, and Cr/Pr for Red. The audio connection is the same as composite and there should be a place on the DVD player that will tell you what audio is for Component. This is also the same on the back of the receiver.

HDMI Connection - This one is the easiest to connect as your audio and video are in the same cable. Plug in your HDMI cable in the back of the DVD player (there should only be one) and then to the HDMI connection for DVD on the back of the receiver.

Now...once you have your connections made, turn on your DVD player, set your receiver to DVD, and enjoy.

If your receiver does not have video inputs, you will need to run the video lines directly to your TV while the audio lines go to your receiver. This will mean you will need to set the receiver to DVD as well as change the channel of the TV to the input you have the DVD player plugged into.

I hope this helps.

May 12, 2008 | Sony DVP-NS725P DVD Player

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96518 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...