Question about Jensen JER-323 Remote Control

1 Answer

Jizzz i´m desperate!!!!

I write u reluctantly because i thought that i could figure it out but i finally gave up tonight so here´s my story
i have an old tv sony and i have a remote jensen jer 323 or 321 i don´t know honestly, my nephews entered to my room and removed the batteries of the remote and it got disprogramed and i lost the list, so far i´ve been looking for the code and even though i found the code i don´t know how to program it for my tv, i already tried some of the solutions but htey don´t seem to wok out, i remember that one time i got disprogramed and i program it in a minute, so could you please help me out??
thanks in advance.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 152 Answers

Jenson 300 series Sony tv codes 497,491,475,459,406 or the code you have
hold the program or setup button untill it blinks. select the tv function and enter the code you have or one i listed above then enter

Or if your remote is this 300c series your code would be 0000
you would press down and release the device"mode key"tv,vcr,ect
the red light will blink once.press and hold down the setup key untill red light blinks twice then release.enter the code the led light will blink once on each digit execpt the last one will blink twice to confirm valid code ****mode 1 is for the tv on this remote.

hope this helps

Posted on Mar 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am in desperate need for a copy of a TV manual for the Dick Smith LCD TV/ inbuilt DVD player combo.


https://www.dicksmith.co.nz/usermanuals/ Need actual model number to try to pursue this issue for You or use the above link Dick Smmith has been Aquired by Kogan an they are changing things rapidly so download what you can Now PS. I had to reload the site many times to finally get it to work ?

May 18, 2016 | Universal Remote Controls

1 Answer

I recently bought a Chamberlain 3/4 hp belt drive MyQ garage door opener. I had an old garage door that I thought was bad, I'm not sure now. The old door opener would lift the door about a 1ft to a 1 1/2ft...


How is the door balanced currently? In manual setting (without the opener) can it be raised by hand, will it hold at it's halfway point, and will it hold at fully open?

These all have to be be in balance before adding the opener.

I just replaced my rollers (Ideal Security SK7123 1 7/8-in Deluxe Nylon Rollers Commercial Grade 11 Ball Bearings) and they made a world of difference to quietness and opening. Plus, more importantly, they gave me clues as to the RHS being misaligned.

There are several videos out there dealing with door side to side imbalances also.

Apr 07, 2014 | Chamberlain Whisper Drive 3/4 Hps Garage...

1 Answer

Can't figure out how to set the remote 2 my tv memorex,its a oneforall remote.


Press the tv button, press and hold setup button for 5 full seconds, then continuously press power button until tv finally turns off, then immediately hit the enter button or tv button to store the code.

Jun 07, 2010 | One For All URC-3021 Remote Control

1 Answer

Code for sv2000 dvd to use with direct tv unverisal remote


SV 2000 TV/DVD combo code using the Direct TV Universal Remote

11963 is the code for the direct tv remote. I just figured mine out tonight!!!

1. switch the top button over to tv
2. hold select+mute button till light blinks twice
3. using key pad punch in 11963 and hit the vol up button
4. when the volume turns up simply just switch the top button back to the d-tv.

DONE!

Dec 26, 2009 | Remote Controls

1 Answer

I have an AKAI LCT2715 and the codes Comcast gave


I recently bought a used LCT2060 that had no remote. I figured my comcast cable remote would work without a problem but it didn't. So 3 universal remotes later I found my solution...a radio shack2_bing.gif universal gamer remote. It controls up to 5 components plus your xbox360, playstation and pc. The price on sale was a mere 12.97, not bad if you ask me. Hope this helped. The code that worked for the Akai2_bing.gif was 11676. Take care...

Dec 23, 2009 | RCA 244889 Remote Control

1 Answer

Cannot access menu


I tried every number code listed on the website for "Sears" and finally found one which gave me menu access. Some codes evidently work for some functions, but not for all.

Jun 29, 2009 | One For All URC-4330 Remote Control

1 Answer

Toshiba remote


I have the Toshiba remote ct-90159 and the Dish Pro 301 receiver. I've spent countless hours searching for the same code as you with no results. Finally I gave up and just started trying all the codes for all the satellite receivers listed in the user manual. I landed on 018 AND IT WORKED! Best of luck to you.

Oct 10, 2008 | Remote Controls

1 Answer

Logitech remote harmony 520


My son gave this to me for Christmas to use for my new Theater system, he's returned to Iraq unable to ask him where the CD or instructions are and what all of these buttons mean.Please note that I am 74 years old and can figure it out if I had the instructions

Aug 12, 2008 | Logitech (9662080403) LCD Remote Control

3 Answers

Blank LCD


Found a solution!!! Hooray!!
Simply call Logitech, and they will send you out a replacement remote. Done.

I thought it would be a huge hassle, but most of us are already registered if you setup the CD and made a user name and password.

The guy acted like he had heard this issue a thousand time before. (Just my opinion, but, I think these screens are wearing out because of the "Try Me" feature on the package which let's shoppers play with the screen before buying it. This is bound to wear out the screen.)

He took me through some basic steps to update the remotes firmware. However, when that didn't work he simply gave me a reference number, and shipped out a BRAND NEW, (not refurbished) remote.

I talked to the guy on Mon. 6/3/08, I had a new remote at my doorstep on Fri. 6/6/08. They shipped it air freight. Logitech has a made a devoted customer out of me.

May 18, 2008 | Logitech Harmony 550 Remote Control

3 Answers

Re remote control need


need the codes for a Zenith tv
advent universal560/660 remote
model # SR 2552s
manufactured 1995

Feb 07, 2008 | Remote Controls

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

16,083 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Jensen Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...