Question about Dell W1700 17 in. HD-Ready LCD Television

1 Answer

Dell W1700 LCD no picture, already replaced board

A friend of mine had one of these and brought it to me when the picture stopped coming up. I found the replacement board with LCDParts.com and ordered, installed it, and everything worked fine till last week, about 4 months. Just for kicks and giggles, I removed the board to do a quick look and noticed char in the left wide 3-pin plug and on the plug itself, which snakes down into the screen. Pics:
http://i230.photobucket.com/albums/ee73/MazterJedi/DSC07230.jpg
http://i230.photobucket.com/albums/ee73/MazterJedi/DSC07231.jpg
http://i230.photobucket.com/albums/ee73/MazterJedi/DSC07232.jpg
http://i230.photobucket.com/albums/ee73/MazterJedi/DSC07233.jpg
Do you think this could have been a faulty board? The screen comes up for about 1 sec, then nothing. If so, I want to contact LCDParts.com and see what they say about replacing the board, its not even 6 months old, and what about the cable to the LCD? Can that be replaced, or maybe it will be fine? Im curious because he gave it to me, and I know its a nice monitor/TV [when it works] and if it can be fixed quick/cheap, Id like to do so. Thanks in advance!!!

Posted by on

  • Anonymous Mar 17, 2014

    Here is a picture of the problem-http://i1360.photobucket.com/albums/r647...

    Basically it is blowing out and distorting highlights. I've already tried messing with picture settings and can make it look a bit better but not fixed.
    What is wrong with it?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

I would suggest to remove the connector from the board and the wire harness and solder the wires directly to the board. In many cases the high current that runs through that connector makes the connections overheat due to the poor contacts at this location. A solid solder connection will last longer.
Good Luck.

Posted on Mar 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have brought this TV [Dell W1700 17 in. HDTV-Ready LCD Television] in the US and have brought it to India. Now when I plug in the video cable I get BW video only without any audio. Please suggest.


Hi ti, My name is John. Welcome to FixYa. Usually when this happens, you have to go into the menu and do another channel search (auto search) or scan, but make sure you have all your cable, wires hooked up properly. While in the menu, make sure you have selected the country that you are in. Thanks for choosing FixYa......John

Dec 08, 2010 | Dell W1700 17 in. HD-Ready LCD Television

1 Answer

No picture only sound. Was working in the past


Ur LCD inverter board have problems before,now the board it dead.U must replaced the LCD inverter board to repair this to get picture back.The board is long in shape.Tries Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replacement.

Mar 31, 2010 | Dell W1700 17 in. HD-Ready LCD Television

1 Answer

LCD TV PICTURE STAYS ON FOR 45 SECONDS THEN GOES OFF FOR 3 MINUTE


video board is shot, providing u still have sound. must replace.

Jan 27, 2009 | Dell W1700 17 in. HD-Ready LCD Television

1 Answer

Dell W1700 LCD TV static audio and b/w picture


Hi bsut96,
Check the cable between the monitor and the box for damage. Try a new cable. It may be a problem with the input board but it sounds like a cable problem. Let me know what you find and please rate this solution. Lone99star

Jan 20, 2009 | Dell W1700 17 in. HD-Ready LCD Television

2 Answers

Dell W1700 When I turn it on, the picture comes on for a moment


replace the capacitors, the surface mount fuses and the

surface mount FET's ( SO-8 package.. there are 4 of them )

the original part is obsolete..
replace with Alpha & Omega Semiconductor part #: AO4622
which is digikey: 785-1046-1-ND

Moose

Jan 07, 2009 | Dell W1700 17 in. HD-Ready LCD Television

1 Answer

Dell 17" lcd tv monitor


Follow the link below for solution.

http://babelfish.yahoo.com/translate_url?doit=done&tt=url&intl=1&fr=bf-home&trurl=http%3A%2F%2Fangelitodiaz.blogspot.com%2F2007%2F10%2Fmonitor-dell-w1700.html&lp=es_en

Oct 11, 2008 | Dell W1700 17 in. HD-Ready LCD Television

1 Answer

Dell W1700 17" HD LCD


analyse your picture quality futher

Oct 03, 2008 | Dell W1700 17 in. HD-Ready LCD Television

2 Answers

Dell w1700 power and no sound or picture


The inverter is out a very common problem on that unit. www.lcdrepair will fix the unit for $59

May 25, 2008 | Dell W1700 17 in. HD-Ready LCD Television

3 Answers

Dell W1700 new inverter board, same problem!


you may have gotten a bad board. this board is the most common failure to the back lights lighting. the cffl's can not be replaced they are a part of the panel, you would have to completely dismantal the panel to get to them. if you feel that the board is good the next step is the main board. the feed back to the main board is not being excepted the processor, replace the main board.

Feb 03, 2008 | Dell W1700 17 in. HD-Ready LCD Television

1 Answer

Dell w1700


Make sure your in the right PC input. There is Analog PC for VGA and then Digital PC for DVI

Nov 16, 2007 | Dell W1700 17 in. HD-Ready LCD Television

Not finding what you are looking for?
Dell W1700 17 in. HD-Ready LCD Television Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Dell Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...