Question about Sony KP-53HS30 53" Rear Projection HDTV-Ready Television

1 Answer

Help with picture not aligned. Convergence Problem??

Same thing pretty much, I copied and pasted part of another request.
my colours are overlaping The picture is visible But it's like two colors are not aligned. Pictures and words have another color like shadow.
I could not align it with the autofocus button in the front.
I have Read, it may be my convergence so can i request the schematics and is possible how to change the convergence (instructions)

highly appreciate it.
KLX400@optonline.com

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

This is a job for experienced tech but if you wants to try first need to replace convergence IC's and repair power supply if there was any damage to it them need alingment of the three colors to converge to one point and if is one of the lates set you need a code to get in to service mode and know the procedure to it I' sugest call a locall shop and get estimated

Posted on Apr 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My colors separate as you go from right to left across the view screen so that at the left side of the screen 3 overlapping images appear, each one is one of the RGB colors. Can this be fixed by me or do I...


U have tools like a soldering iron,a desoldering pump or a roll of desoldering braids and also can do and have pretty good soldering skills,because it involving replacing convergence ICS.The tv have dead convergence board must replace 2 STK convergence ICS and some or all it resistors too.To fix the convergence board,to solved the picture convergence problems.As i said u have all the tools have pretty good soldering skills,tries websites like Tvrepairworld.com,Tvrepairkit.com to buy a convergence kit belong ur tv model and make to fix it ur self.Or the shop,will cost like $300-350 for parts and labors.

Feb 05, 2011 | Sony KP-65WS500 65" Rear Projection...

7 Answers

I hav a RCA model D52W25 its 52" it has convergence problems dont know how to setup the color things can u help??


Click on the following link :

http://www.riddledtv.com/repair/RCA.html. Go to the following section

RCA 52" D52W25 ITC222 rca_d52w25_small.jpg
(2) (3) (4)
(5) Stretched Image at top and bottom edge very distorted. Reheat all the surface mount solder points on the Small Signal Board. Then realign the set including convergence menu. To enter service mode: power off the set for 10 sec, then hold down Vol- and Ch- buttons for 10 sec. See this link: Alignment Procedure (pdf)


Also download the Alignment procedure pdf file. Hope this will help you. Please let me know if the information was of any help to you or you need further assistance.

Thanks

Oct 08, 2008 | Televison & Video

1 Answer

Ghost / Overlapping Image


ok you have defective convergence crrection circuit! or maybe the RF Box is defective! can you describe the color of the ghost?

 

Oct 12, 2007 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Picture


This tv have convergence problems,it dead.Red,green,blue misaligns colors,have colors shadows,3d colors pic like.All these problems are the convergence board have 2 STK convergence ICS some or all it resistors are dead.These parts must change to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jun 07, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

The picture colours are not aligned. What is the


Convergence board is bad. Not an easy repair.

Oct 24, 2009 | Televison & Video

1 Answer

Color overlapping and curved picture. I have had problems in past with the green curved lines but fixed by adj the voltage screw


Ur convergence is dead,need a convergence kit,use what in that kit.U know how to solder right?Buy a convergence kit, with these websites.Tv Repair World.com,Ebay.com.

Sep 28, 2009 | Sony KP-57HW40 57" Rear Projection...

1 Answer

Picture distortion


Sounds like convergence is off. Need new Convergence amps. Could cost a couple hundred. Check around. If it has an auto converge or manual converge try that first. Check menu

Apr 08, 2009 | Televison & Video

1 Answer

Bad ghosting of all colours


The most likely cause is shorted convergence chips and possibly a few pico fuses.

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony,Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer2_bing.gif Hitachi,Mitsubishi,Zenith and others.
You can get a convergenece repair kit with instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2
Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

You can see some more examples and find a fix herebb0cf99.png http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jan 09, 2008 | Samsung PCL545R 54" Rear Projection...

1 Answer

Colors not matched


Yes,there are convergence alignment adjustments, to be adjusted
by a technician after set is repaired.Replace STK392-560 IC's,then
check alignment..........T. 

Oct 28, 2007 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?
Sony KP-53HS30 53" Rear Projection HDTV-Ready Television Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98921 Answers

The Knight
The Knight

Level 3 Expert

69955 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...