How to reset back to factory default Airlive WH-5400 CPE
I got a problem with my CPE which I could no longer access using my username and password. I am hoping that there's such a way that I can handle this situation which I can reset the device manually, since that I could no longer access the device and the problem also that there is no reset button.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you know the current one, just login to the admin interface, find the 'SECURITY' section and reset it to whatever you want. If you do not know it, you will need to reset the router (usually a simple push-button on the bottom or back - press and hold for a few seconds) and then login using the default login/password for the router and start over.
you can reset the router to factory default by pressing the Reset button at the back of EW-7206APg for 15 seconds. This will erase all the setting in EW-7206APg and restore the factory default. after that
Turn off the router.
Press and hold small reset button (usually with a pin or pen) for 1 minute.
While still holding the reset button, turn the router back on and keep holding reset button for 30 seconds.
This will completely reset your router. The username/password will be set to default. (Usually Admin/Admin)
Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.
The easiest thing to do is reset it to factory defaults. Unplug the power, use a pin or something to hold down the reset button, wait 30 seconds, and plug the power back in while holding the reset button. Then it'll be returned to factory defaults, and use the old password of, I beleive, admin.
Hi dear try to flow this tips it will help you Administrator Settings Administrator settings allow you to customize User Name and Passwords as an Administrator of DWL-2700AP. The default value of the Username is "admin" with no password entered. Password Enter a password in the Access Point Password field. Type the password again in the next field to confirm it. The Password is case-sensitive ("A" is a different character than "a",) and must be between 0 and 12 characters in length System Settings You may reset the DWL-2700AP back to factory settings by clicking on Restore Default settings. Restore Default Settings Choose Yes and click Apply to restore all Access Point settings to the factory default settings. Thank you
Pls rank as possible
I had the same problem and got the resettor software,it still did not reset the cpe, i took matters into my own hands and shorted the sw1 jumper on the board for about 30 secs.
There 5 small silver strips, 3 are right next to each other ,the other 2 are apart and also next to each other. Short the 2 that lie side by side for about 30 secs and your cpe is reset to factory default.