Question about Sharp Notevision PG-B10S Multimedia Projector

2 Answers

Lamb will not reset

How do i reset

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 6 Answers

Reset The Lamp Timer.

While simultaneously holding down (+ . >) and AUTO SYNC on the projector, Press ( I ) ON and ( - . < ) on the projector.

"LAMP 0000H" is displayed, indicating that the lamp timer is reset.

NOTE..... Make sure only to reset the lamp timer only when replacing the lamp. If you reset the lamp timer and continue to use the same lamp, this may cause the lamp tp become damaged or explode...

Sinista

Posted on Jul 10, 2008

  • Kevin
    Kevin Feb 02, 2015

    Can you clarify this answer? Is this for a CPX328 Hitachi?

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an pt-lb60u panasonic projector and i plan on replacing the lamp, will i just swop the old 1 out with the new 1 and it will work again?

Posted on Nov 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How long to cook a 1.019kg lamb from frozen


Why cook frozen food? To get better quality and consistency, it would be better to thaw it first. As for how long, search the internet for "lamb recipes." It depends on what cut it is and what temperature.

..

May 09, 2016 | Multimedia Projectors

1 Answer

Where to buy a new lamb


seems the last market quote was 2.95 a pound

Jul 25, 2015 | LG HS201 Projector

1 Answer

After around 1 minute the lamb goes off and the system goes to standby


the lamp is good one, it is ok .the mother board is ok
it seems like the fans is defective
pls check every fan in the projector

Have a good day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip,color wheel, motherboard, powersupply ... with high quality and competitive price.
Jerry China Lampdeng Limited
Tel: +86 131788 67858
E-mail: lampdeng@hotmail.com
Skype: lampdeng.com
YM: lampdeng@yahoo.com
http://facebook.com/lampdeng
http://www.lampdeng.com

Feb 21, 2014 | NEC M260X LCD Projector

1 Answer

How do you change the lamp in a mod # 980Z keystone projector


There is a black and silver knob under the keystone label( right above the automatic label ) on the side of your projector. turn this knob counterclockwise to loosen the covering over the housing unit for the lamb. once the knob is loosened lift the housing unit off of the side of the projector. You wlll see the enclosure where the lamp fits into beneath it.
Make sure the power is off for your projector while doing so. Screw the lamb into the enclosure , then replace the covering and screw the black knob in clockwise until it tightens.

Sep 21, 2012 | Multimedia Projectors

1 Answer

Could you please advise how to reset lamp timer on a fujitsu LPF 4800 when I turn it on the green light goes to red and the lamp light indicator goes to red too and blinks


hi
You can reset the lamb timer as follows.
While pressing the MODE button, press the POWER button three times.
all the monitors flashes for a few second , The lamp timer is initialized to[ 0 hours] .

ok

Dec 15, 2010 | Fujitsu LPF 4800 Multimedia Projector

1 Answer

The fans are on all the time, no light though, the buttons on the unit do light up. Would this be the lamp?


The fans are on all the time, no light though, the buttons on the unit do light up. Would this be the lamp? No lights on POWER, TEMP and LAMB

Sep 12, 2010 | BenQ PB6200 Multimedia Projector

1 Answer

Projector wont power up


Hello :

Check your fans, The projector will not power up if either of the fans have failed . A defective electrolytic capacitor in the power supply can cause the problem also . You could check the lamb also . If the lamb is defective that also can cause the problem .

good luck .

please don't forget to rate !

Apr 04, 2010 | InFocus IN72 Multimedia Projector

1 Answer

Someone told me to check my filter before I change the lamb because I may not have to change the lamb.I turn on my projector but I get no picture.


there is no filter on this model. just open it up and blow the dust out of it. if the lamp still won't light, check to see if the colorwheel is spinning. if it doesn't spin, the lamp won't light. if the lamp side screen is clogged with dust, the lamp is shot.

Mar 16, 2010 | InFocus ScreenPlay 4805 Multimedia...

1 Answer

Philips bsure SV1 , LCD multimedia projector


Pl try M. R. nterprises Mumbai +91 22 23802513/23856204

Oct 29, 2007 | Philips bSure SV1 Multimedia Projector

Not finding what you are looking for?
Sharp Notevision PG-B10S Multimedia Projector Logo

14,824 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Multimedia Projectors Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

kc5mgc

Level 1 Expert

8 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sharp Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...