Question about Daewoo DVDS151 DVD Player

1 Answer

No sound This is a problem that seems to come and go. The dvd player is hook up and everything and there is video but no sound at all. Whats the deal?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

The DVDS151 has its own built in volume control that is easy to hit the buttons near the bottom of the remote and accidently turn the volume down.
even tho your tv volume is set high it won't pass the sound to the tv if it is on mute or turned down.

Posted on Sep 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an old 2007 DVD player that was working very good. Now that is is hooked up to the new flat screen it will not give me a picture or sound. I put it on HDMi2 and everything seems to be hooked up...


it needs to be on component not HDMI input
avi1, av2, and so on component cables are intended for low res input HDMI is 1 wire bundle consisting of audio and video at high resoution

Dec 24, 2012 | DVD & Blu-Ray Players

1 Answer

Dvd player only plays in b&w, and connectors dont seem to match up with tv


Go into the player's setup menu and make sure it's set for the kind of connection you're actually using (component, S-video, composite). Also make sure the connections are pushed "all-the-way-in" Lose connections can cause B&W picture.

Sep 09, 2007 | DVD & Blu-Ray Players

1 Answer

RCA DRC247N DVD Player No Audio


The separate DVD player has three output cables: video (yellow), right audio (red) and left audio (white?). These connect to the corresponding inputs on the TV. If your cable box also has three similar output cables, you probably do not have a second set of inputs on the TV so what to do? You can purchase three Y adapters that combine two female RCA connectors into one RCA plug and plug everything into your one set of connectors on the TV. However, if your cable box output connects directly to the TV antenna input, the solution is simpler. Post a comment if this approach is not going to work

Oct 13, 2012 | RCA DRC247N DVD Player

2 Answers

How do I hook up the DVD/VCR to cable box and Vizio HDTV?


both should be hooked directly to tv

VCR side of combo should be hooked up with composite video(yellow, red, white wires) to video 1 input

DVD side of combo should be hooked up component video (red, blue, green wires and red white for sound)

cable box should be hooked up HDMI or component to TV if HD or composite video if SD

hope this helps

good luck

Mar 13, 2011 | Samsung DVD-V4600 DVD Player/VCR

1 Answer

Can we record with our sanyo drw 500 and a digital tv? If so, how do we do this?


If cable/SAT box, hook-up that box video/sound output to DVD video/sound input. If no cable/SAT box, hook-up cable from wall into antenna/cable in on DVD and tune DVD to channel wished, and hook-up DVD TV antenna out to TV antenna in. If DVD has no antenna/cable in, TV must have video/sound output. Hook to DVD video/sound input. Hope this helps.

Apr 18, 2010 | Sanyo DRW-500 DVD Recorder

2 Answers

DVD is playing in black and white


check the norm pal or ntsc,or video format

Feb 17, 2009 | Pioneer DV-333 DVD Player

2 Answers

How to hook up a dvd player to a dtv


Hi, If the DTV does not have Video IN, then you can't. Thanks, Mike

Oct 04, 2008 | Memorex MVD2042 DVD Player

1 Answer

Have a jvc drmv5su won't record sound with our new sony home theater


try an s-video, and some good rca sound, the red and white rca cables, and see if that works!

May 11, 2008 | JVC DR-MV1S DVD Recorder/VCR

1 Answer

DVD picture is black and white


Sounds like you are either trying to play an NTSC (US or Asian) DVD on a PAL (European) TV.

Go into the DVD settings and look for picture, video or display options.

If the DVD is set to NTSC, then set to PAL.

Jan 06, 2008 | Philips DVD 622 DVD Player

5 Answers

No picture


Tvs usualy have a few ways to hook them up. One is a coax cable this is the silver one in the back that you screw in a cable. The second are RCA cables these are the ones that are yellow, red and white. Yellow is always the video and white and red are for audio. If your using the coax cable your tv needs to be on channel 3 or 4 you may have to force the tv to go to that channel by pushing 03 on the remote. If you are using the Rca cables then you need to change the tv to "video 1" or "video 2" this changes the tv from tunner mode to aux input mode. Most DVD players dont have a coax out so you have to use the rca plugs. Some tvs have the rca plugs on the front (video 2) and the back (video 1) or line in. Some tvs have line out also so you need to figure out wich way you have it hooked up. Do a search for the model of your tv and it should show a diagram on how to hook it up.

Apr 07, 2006 | Emerson EWD2003 DVD Player/VCR

Not finding what you are looking for?
Daewoo DVDS151 DVD Player Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68250 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Yoav Shilon
Yoav Shilon

Level 2 Expert

101 Answers

Are you a Daewoo DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...