Question about Sharp AL-1641CS Laser Digital Copier

2 Answers

Getting an error L flashing then 1

When I turn the machine on I am getting an L flashing then 1

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Background:
The L1 is indicating a scanner lock.

Easy way to fix it:
1. Turn machine off.
2. Turn scan locking switch to unlock. This is a clear plastic knob. (it is located on the left hand side of the machine under the document glass in the copy exit area - check your manual for a picture of it around page 9 or so).
3. Turn machine back on.
4. Try a copy.
5. If you still get an L1 then it might need service because the scanning bar is jammed. They will ask you to try some service codes first to verify that it is indeed jammed. Call 1800 237-4277 for further support.

Followup:
This also is a fix if you are getting blank copies.

Posted on Mar 18, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 62 Answers

Turn it counter clockwise.

Posted on Mar 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E02 flashing


Whirlpool breadmaker e02 error Questions & Answers - Fixya

www.fixya.com > Forum > Tags > breadmaker e02 error
Ask your Whirlpool breadmaker e02 error questions. Get free ... I am getting F01 andE02 flashing errors and the machine will not go into spin cycle . How bad is ...

Nov 28, 2015 | Kitchen Appliances - Others

1 Answer

I am getting error code FULL-9 and I don't know how to solve


Turn machine off hold .05 .10 & .25 buttons down at same time turn power switch on it will flash 00 then go blank turn machine off and back on it should work fine.

Aug 23, 2013 | Magner Retail Supplies

1 Answer

SUP 0320R - ERROR CODES


we are getting a rapid flashing between the prime and coffee icons, flashing back and forth, when we push the brew button.
the machine does not need descaling, it primes properly when turned
on, it is only when I try to brew that it begins this rapid red flashing between the two icons.

Aug 08, 2013 | Saeco Coffee Makers & Espresso Machines

1 Answer

I have an Eliptical Trainer BY-430E. I keep getting Error 1 every time I turn it on to use it. Does anybody know how this can be repaired. Thanks in advance


Error 1 on a schwinn is a generic electrical error. Check your ac adapter and make sure you're getting the proper voltage off of it. Typically an error 1 warrants a replacement of either the ac adapter, the wire harness (wires that connect the power to the console) or the console itself. If the console has batteries, change those first, then check your adapter. If the problem persists, you're looking at a more in depth problem that will require taking the casing off the machine and individually testing each component of the machine. It's usually worth at that point to pay a tech to look at the machine for you.

Jun 28, 2010 | Schwinn 430 Elliptical Trainer

1 Answer

I get a flashing E-1 error code


I keep getting the flashing E-1 error code...
In the manuel for trouble shoot I do what it ask and there's no change. It will run for 2 or 3 minutes then just start flashing " E - 1" code. Need help Please.

Jun 08, 2010 | Whirlpool GEW9200L Electric Dryer

1 Answer

I am getting an error code: Flashing F-20 Can you help me?


With a Whirlpool an error code F-20 typically means the water input screens are clogged or there is a problem with the water inlets. Turn your water off, remove the hoses, clean the screens on the machine where these hoses connect to.

Nov 16, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Kenmore Elite he3t model 11045972404


POSSIBLE COMMUNICATION PROBLEM BETWEEN MAIN AND MOTOR CONTROLLER

Nov 22, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

2 Answers

Cannot get Canon PIXMA MP 150 to work at all


salve la mia mi canon mp 150 lo scanner non funziona e mi da errore code 2,250,0

Apr 18, 2008 | Canon PIXMA MP150 All-In-One InkJet...

5 Answers

E:91:01


easily just reset the camera with a pencil.

Aug 14, 2007 | Sony Cyber-shot DSC-T10 Digital Camera

Not finding what you are looking for?
Sharp AL-1641CS Laser Digital Copier Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...