Question about Janome Memory Craft 10000

1 Answer

Feed dogs the feed dogs won't raise manually or electricly

Posted by on

  • Anonymous Mar 13, 2014

    My Dressmaker model s-3000, serial number 60565. The handle that raises the feed dog acts like it is broken, & it doesn't raise the feed dog. I don't have the manual? Thank you.

  • Anonymous Mar 18, 2014

    where is the switch to raise and lower feed dogs

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

If the machine has a 'darn' facility and this is selected the feed dogs 'will' stay down.

Other than that(without looking) i would guess a good clean and a dose of lubrication would not go amiss.

Try removing the needle plate to see of there is any compacted "fluff/lint" or indeed anything else stopping the dogs rising. Take off the bottom access cover have a good clean out and oil.
Best of luck
Rob

Posted on Mar 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

6235 singer ! How do I raise feed dogs ???


According to the manual, there is an accessory that covers the feed dogs. (Shown as an accessory on page 4.) So the feed dogs should not raise or lower other then during normal sewing action of moving the fabric.

Singer 6235 User Manual Page 24

Singer 6235 User Manual Page 6

...

Dec 27, 2016 | Singer Sewing Machines

1 Answer

Feed dogs lowered can't raise material not feeding thru


Is your machine mechanical? If so, sounds like the feed dogs are stuck in the lowered position. Needs good cleaning and oiling.

Perhaps this will help:
The feed dog knob won turn don think anything is broken haven used the...

...

Dec 30, 2015 | Sewing Machines

1 Answer

How do I raise the feed dos


Consult your owner's manual. There is a switch, lever, or knob somewhere on your machine that raises the feed dogs. If they are stuck in the down position and your machine is mechanical, could very well be it has seized due to lack of cleaning and oiling.

This may be helpful:

The feed dog knob won turn don think anything is broken haven used the...

...

Dec 30, 2015 | Sewing Machines

1 Answer

How do i raise the feed dogs on my singer 30215 machine


Slide of the the little table with the accessories in.There is a feed dog adjustment lever at the back of the machine. sliding the lever to the 2 filled in arrows pointing down, will lower them and the 2 filled in arrows pointing up will raise them. The feed dogs will not rise up if you do not turn the hand wheel manually, even if the lever is slid to the right.You must make a complete turn of the wheel to raise the feed dogs.
Best wishes.

Jun 29, 2014 | Euro-Pro Shark 9110 Sewing Machine

1 Answer

I have a singer 543 the feed dogs won't move.


I suggest getting out your manual and looking up lower and raising the feed dogs. When the feed dogs are lowered they don't move. You could have lowered them without realising it.

Mar 18, 2013 | Sewing Machines

1 Answer

Singer 4423 feed dogs won't come back up


The slider on the back of the machine that raises or lowers the dogs is incapable of dislodging the thingamajig when it is gently lodged on the shaft.

Oct 17, 2012 | Singer 4423 Sewing Machine

1 Answer

Feed dogs won't raise and lower on my memory craft 9500, how can I fix this problem?


when your machine on your machine movable arm pushing a switch liver which will raise your feed dogs you can do one thing when your arm moves to the normal possision just given your finger to the upside movable are you see one long switch bar is there just push and see machine feed dogs will come out actualy that action to be done by arm only,you call one MC expart to resoved your problem permenetly.

Apr 21, 2012 | Janome Memory Craft 9500 Computerized...

2 Answers

Hi, have tried to use buttonhole feature on singer 4423. Dog feed teeth have dropped - won't come back up and the material isn't feeding though. Any help greatly appreciated.


Re: Reverse feed dogs on Singer 4423 Remove extension table so you can see switch on BACK of machine @ left side. Flip switch to raise feed dogs up. If machine actually sewing in reverse - check n Buttonhole adjustment. Reset it (located bottom right side machine) Jimmy

Apr 04, 2012 | Singer 4423 Sewing Machine

1 Answer

My feed dods have droped down how can we ajust them to raise them.


Usually when you slide the knob to drop the feed dogs they drop immediately. But when you switch the knob back to raise the feed dogs, they won't come up until you rotate the handwheel one revolution in the forward direction.

Apr 25, 2011 | Janome Memory Craft 9000 Computerized...

7 Answers

Feed dogs


I was having trouble with this too, but found more help online...you have to switch the dog feed back to 'up'....then turn the needle wheel toward you....the feed dog should snap back into place :)
Hope this helps :D

Mar 18, 2008 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

176 Answers

Irene Tulloch

Level 2 Expert

458 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...