Question about Toshiba Satellite 4005CDS Notebook

2 Answers

TMOUSE (01) error - Win 98 bootup

I don't have recovery cd that contains win 98.

Mouse (Accupoint) will only work in safe mode. Cannot load a
PS/2 mouse device in safe mode. Therefore, catch 22.

Also, A drive does not read in safe mode. How am I supposed to load a PS/2 mouse if I cannot get past the TMOUSE (01) that comes up at bootup?

How can I fix the problems when the a and cd drives do not read in safe mode? I can't get the Accupoint mouse to work in Normal or any other mode. Catch 22 again...

Thanks for any help you may help. Oh, and I don't have a win 98 recovery CD either in order to fetch the utility or drivers I need to make mouse work and anything else.

Thanks.
Sherry

Posted by on

2 Answers

Up grade the memory to 64mb. and install xp pro
works great for me running on 160som meg of ram but i cant find the video drivers

Posted on Sep 16, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

Try booting using the step-by-step confirmation instead of safe mode. Skip loading the mouse driver that is causing the error. You won't have a mouse when you get booted up but you can use keyboard commands to navigate everything while you try to reload drivers.

Posted on Mar 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Forgot my password for laptop


Try going into safe mode.... holding down F8 and resetting it from there.. depends on what ver. of Win your running.
Also try: http://freewaresys.com/threads/windows-password-reset-recovery-disk-win-8-7-vista-xp-iso-size-55-21-mb.1354/#post-2529

It's free.

Sep 03, 2015 | BenQ Joybook 3000-01 Notebook

1 Answer

\windows\system32\kdcom.dll Missing or corrupt Kernel debugger


Try tapping F8 at bootup to enter safe mode, read your manual to see if you have a recovery partition on your HDD. You didn't post the model so I have no clue.

If you can enter safe mode you need to try system restore, not last good know configuration.

If you see last know config on your screen, then you should also see safe mode.

So you need to run in safe mode, and run system restore, or run the recovery mode if you have a recovery partition on the HDD.

If none of these work, then you only have three options, go to Avira.com, download the rescue disk, burn it to a CD and run it in DOS, this is before windows boots. Now if malware corrupted the DLL, Avira will kill it, but there is a chance it can't clean it and will destroy the files,DLL, and windows won't boot. So now you have to do below.

The other option is you need to download windows, what ever version you have, if you have win 7 home 32bit, then you have to download it, and burn it to a DVD. Then try a repair, if a repair does not work then you need to reinstall windows, and then install all the drivers like, (chipset, video, sound, lan, wifi)

This option, you can contact Acer and see if they have a recovery disk for you.

Good luck.

Apr 01, 2013 | PC Laptops

1 Answer

How can I start Win XP in safe mode with UKASH virus scam (don't ask - just keep teenage nephews away from PC). Can get into boot up and select 'Safe Mode' but it gets bypassed.


If you can get to the Internet then you can use a WEB based virus removal.

If you cannot boot up and you do not have a virus scan disk then you need a Recovery CD that came with your laptop to restore your laptop back to the Out of the Box condition.

Try these -
WEB-based Virus Scan
Trend Micro HouseCall http://housecall.trendmicro.com Symantec - Norton Security Scan http://security.symantec.com

Mar 07, 2013 | PC Laptops

1 Answer

I dropped my laptop now when i turn it on i get error message saying tyhe kernel is missing or corrupt.i've tried booting from the cd i got and nothing, when i try starting in safe mode windows starts...


Think the worst.!! and accept you have lost all!

Do a restart, on accessing push F8. safe mode menu's.
Click recovery, follow in structions. hopfully this should work, you pick when you wish to recover to which date.
Should this be sucessful, save/copy your iportant docs and keep them up to date.

If this fails to recover, then you have lost all!

Restart, F8 choose Factory Recovery this will formatt all and reinsert a fresh win system, that is of course that there is no damage caused when impcting on the ground.

Hope all works out well?

May 12, 2011 | PC Laptops

1 Answer

Tried inserting recovery cd-rom in satellite P10 (windows XPHome) and first screen shows message about running Windows98! Aborted process and PC is OK. Is it safe to proceed?


should be. It looks like someone updated that computer from Win 98 to XP - that's why the recovery disks are for Win 98. You should be ok to proceed if you didn't do any of the recovery. Are you able to use System Restore to force computer to revert to an earlier time when everything was working ok?

Jan 09, 2011 | Toshiba PC Laptops

2 Answers

Blue screen Technical information stop: 3A0x00000024 280x00190203 2C0x81B599F8 2C0X0000102 2C0x00000000


So many computer face this blue screen fetal errors on windows.

This error comes usually when there is problem in software or driver compatibility issue with hardware or operating system.
Also this error comes when there is bed indexing unit in hard drive.
You can solve this errors with following 2 methods.
(1)When you power up the computer press F8 key then enter in safe mode.
Then if you are able to enter in safe mode then uninstall driver or software which you installed recently and face this error.
(2)If you are not able to enter in safe mode Then you need to fix error on hard drive.For that you need windows disk or recovery disk.
Boot your computer with that disk
For that when you power up the computer press F1 or F2 "del" key to enter in bios.
Then go to boot menu and set first boot device as your cd or dvd rom.
Then save settings and exit bios.
Insert windows disk in cd /dvd rom.
Then it boot with that disk.Then you get this message "Press any key to boot from cd.."
Then press any key.
Then follow the procedure then enter in recovery console mode then type in prompt "chkdsk /r"
Then type "y"
Then it fix error on hard drive.
Then check if again you are not able to enter in windows then boot again and this time choose "R" option for repair previous windows " then it repairs old windows then it loads again old windows.
Thanks for using FixYa.

Mar 04, 2010 | Dell Inspiron 2200 Notebook

2 Answers

Blue screen of death presario v2000


So many computer face this blue screen fetal errors on windows.

This error comes usually when there is problem in software or driver compatibility issue with hardware or operating system.
Also this error comes when there is bed indexing unit in hard drive.
You can solve this errors with following 2 methods.
(1)When you power up the computer press F8 key then enter in safe mode.
Then if you are able to enter in safe mode then uninstall driver or software which you installed recently and face this error.
(2)If you are not able to enter in safe mode Then you need to fix error on hard drive.For that you need windows disk or recovery disk.
Boot your computer with that disk
For that when you power up the computer press F1 or F2 "del" key to enter in bios.
Then go to boot menu and set first boot device as your cd or dvd rom.
Then save settings and exit bios.
Insert windows disk in cd /dvd rom.
Then it boot with that disk.Then you get this message "Press any key to boot from cd.."
Then press any key.
Then follow the procedure then enter in recovery console mode then type in prompt "chkdsk /r"
Then type "y"
Then it fix error on hard drive.
Then check if again you are not able to enter in windows then boot again and this time choose "R" option for repair previous windows " then it repairs old windows then it loads again old windows.
Thanks for using FixYa.

Feb 11, 2010 | HP Compaq Presario V2000 Notebook

2 Answers

How do i fix the blue screen stop 0x0000007e on my dell laptop vostro 1510. I can't even start in safe mode.


So many computer face this blue screen fetal errors on windows.

This error comes usually when there is problem in software or driver compatibility issue with hardware or operating system.
Also this error comes when there is bed indexing unit in hard drive.
You can solve this errors with following 2 methods.
(1)When you power up the computer press F8 key then enter in safe mode.
Then if you are able to enter in safe mode then uninstall driver or software which you installed recently and face this error.
(2)If you are not able to enter in safe mode Then you need to fix error on hard drive.For that you need windows disk or recovery disk.
Boot your computer with that disk
For that when you power up the computer press F1 or F2 "del" key to enter in bios.
Then go to boot menu and set first boot device as your cd or dvd rom.
Then save settings and exit bios.
Insert windows disk in cd /dvd rom.
Then it boot with that disk.Then you get this message "Press any key to boot from cd.."
Then press any key.
Then follow the procedure then enter in recovery console mode then type in prompt "chkdsk /r"
Then type "y"
Then it fix error on hard drive.
Then check if again you are not able to enter in windows then boot again and this time choose "R" option for repair previous windows " then it repairs old windows then it loads again old windows.
Thanks for using FixYa.

Feb 10, 2010 | Dell Vostro 1510 Laptop

1 Answer

My sony laptop with windows xp home media center keeps rebooting


When XP gets into the rebooting mode, you will have to run a chkdsk or do an XP repair. You will not lose your data. But you do need your recovery cd or a WinXP cd.

Take the Windows XP disk. Boot from it, then DO NOT select F2 (automated system recovery) but continue through the procedure until you get to the point where you can choose between installing Windows XP and entering the Recovery Console. Once you get into the Recovery Console, do chkdsk and fix potential errors on your disks! Type chkdsk C: /R at the prompt in the recovery console.

XP repair
When you boot with the Win XP install CD-ROM, it loads a minimal operating system, similar to DOS, but compatible with Win XP. At the first screen you select install Win XP (not Recovery Console) and at the next screen it will find that you already have Win XP and offer to attempt a repair. This repair should not touch your Applications or data; it just reinstalls the Windows files. This is great because when it works you don't need to reinstall all your software.
Lastly, your drive can be taken out of the unit and set into an enclosure or adapter. The data can be saved, the your hard drive can be formatted and programs and data reinstalled.
Good Luck,
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Mar 10, 2009 | Sony VAIO VGN-NR120E/S Notebook

1 Answer

Emachine


F10 should get you into BIOS.

Jul 27, 2008 | HP Pavilion dv9000z Notebook

Not finding what you are looking for?
Toshiba Satellite 4005CDS Notebook Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba PC Laptops Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

john smith

Level 2 Expert

366 Answers

Are you a Toshiba PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...