Question about Dell (E210882) Motherboard

3 Answers



Posted by on

  • 1 more comment 
  • Anonymous Aug 23, 2008

    вы все уроды

  • jbostock Oct 16, 2008

    Issue with 4 of 20 student stations. Video garbles. Replace drivers, no effect. Update drivers, no effect. Works in safe mode only, but at higher resolutions in normal mode, video is a mess. Installed TNT2 Vanta AGP cards and all is functioning as it should. Annoying as I just had another fail this morning.

  • Sergio Scalfaro
    Sergio Scalfaro May 11, 2010

    the motheboards make some sound?



3 Answers

Hello, this problem is so comun in this model of intel, sorry but your Video Prosessor is burned, fucket, it will`nt work any more,

Posted on Jun 09, 2008


Just had no signal to the monitor after hours of trial and error I discovered I lost a memory slot removed and rearranged chips but finally got it to work.

Posted on Mar 20, 2008


Initially, the power supply failed, after replacong it, the cpu powered up but I had no videao signal out.....not sure about sound....never tried any thing else, couldnt see any thing....

Posted on Mar 18, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The tv will not turn on

It is alongg sttory, start from the power to the power supply, if Ok the proceed to the main board, check voltage to microprocessor.
If powerr supply is faulty replaced failed components
Please refer to my tips columns for SMPS replacement procedures.
If supply is fine then the mP must work to trigger set. If not the output section is faulty

Sep 12, 2010 | Televison & Video

1 Answer

Cannot power up computer with Dell motherboard E21882. Power supply seems fine. Even after I replaced power supply system would still not come up. Can I test the front panel plug to see if the power on...

yes but try testing all leads that attach to your hard drive including electrical extensions and also the ones from your motherboard that attach to your hard drive also test the leads that attach to cd,dvd,3.1/2 floppy drives
hope this helps

Aug 13, 2010 | Dell (E210882) Motherboard

1 Answer

No video/ does not power on

Check the power supply, you must have at least the +5vdc standby voltage at the power output connector, look for bad caps withleaking/bulging top, you may also have shotrted out Q7 and ZD4 in the +5vdc standby power supply section. Hopefully you do not have failed inverter bd. too. The power supply module and the inverter board are common parts that failed.

Power supply:

May 14, 2010 | Protron PLTV3250 32 in. LCD Television

1 Answer

E210882--No display on boot

first check ur memory is it working correctly or not,if its working fine then check ur power supply may there is any problem

Mar 01, 2010 | Dell (E210882) Motherboard

1 Answer

My wii console will not power on. have checked all plugs and everything is connected and outlet has power

HI. the power supply board has failed. There is a fuse(3amps) inside the power supply unit. you will need to remove the cover from the power supply to access this fuse. once inside the power supply, inspect the fuse. if it is truly blown, replace it. if the fuse is not blown, this will confirm a failed power supply unit. it should be replaced in this case...

Aug 04, 2009 | Nintendo Wii Console

1 Answer

Changed video games and then it would not turn back on. No power to the wii box.

HI. the power supply board has failed. There is a fuse(3amps) inside the power supply unit. you will need to remove the cover from the power supply to access this fuse. once inside the power supply, inspect the fuse. if it is truly blown, replace it. if the fuse is not blown, this will confirm a failed power supply unit. it should be replaced in this case.

((Contact Nintendo for a repair ticket if the unit has failed))

Aug 04, 2009 | Nintendo Wii Console

1 Answer

No video e210882

Here is some great PC solution by Some FIXYA EXPERT. Get any kinds of PC solution from bellow.

  1. Intel MotherBoard
  2. Mercury Motherboard
  3. Gigabyte Motherboard
  4. MSI Motherboard
  5. P5GC-MX/1333 Motherboard
  6. via


Apr 12, 2009 | Dell (E210882) Motherboard

1 Answer

Gateway 838gm has no video output. no beep during power up how do I trouble shoot

If you are getting nothing, no beeps, nothing spinning then you might have a bad power supply or failed motherboard. I would also take this time to inspect the motherboard (mobo for short). It should not have any capacitors (they look like tiny soda cans) that are bulging at the top, swollen at the top or leaking any kind of fluid. They should be perfectly flat. If your motherboard looks good then I would get a new power supply. You will want to take out your other power supply and look for the output watts. It will probably be in the range of 150 to 300. You must buy a power supply that has more than what you take out, never less. If you have put in a bigger video card or have a lot of expansion cards that you have added to the system you will want to increase the power supply over 400 watts.

Mar 22, 2009 | Gateway 838GM (RB838GM) PC Desktop

1 Answer

Ibm thinkpad t22 2647

Four things that could cause this. 1- power supply, check it for the proper output with an ohm meter, 2- bad battery, try starting with the supply only, 3- bad memory chip or slot, remove the memory, and try each chip one at a time in each slot, 4- failed power management system on the motherboard. Unfortunately, a failed power management system or chip is common with these, and the motherboard will have to be replaced in order to fix it.

Aug 13, 2008 | IBM ThinkPad T22 2647 Notebook

2 Answers

Dell W2600

The video drive board may have failed, or the output section of the power supply that drives the video drive board may have failed.

It is also possible and is common on LCD sets, that the backplane lamp supply, and or the backplane lamps have failed.

Turn on the LCD TV set, and shine a flashlight in to the screen at an offset angle. If you can see a bit of the image, you know that everything is working, and it is a backplane illumination problem.

Jerry G.

Apr 09, 2008 | Dell W2600 26 in. LCD Television

Not finding what you are looking for?
Dell (E210882) Motherboard Logo

Related Topics:

1,329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides