Question about PC Desktops

1 Answer

9000 states scanner is not connected when it is connected

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Check the usb connection first.....if its fine go for the next step.....check the scanners and cameras in control pannel....everthing fine go for next step.........check the device manager and check it out any confliction are thr.....fine...just go for update driver in device manager for scanner hardware....and reboot..u ll get the scanner again. have a nice day

Posted on Mar 17, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a casio se 300 and a voyager 9520/40 do they connect?

No. you have the wrong scanner interface. The initial setup for scanners can be tricky also. It is supposed to be set by the dealer with special service bar codes to sync the scanner with register. If you bought it from a dealer or re-seller, you should see if they have an RS232 scanner and casio settings. They are not plug and go.

Dec 20, 2011 | PC Desktops

1 Answer

How can i install and use umax astra 4100scanner

Dear Sir,
Plug in the scanner and switch the power on.
Please visit here to get your scanner's drvier. Here at almost middle of the page you will find
>> Driver Download >> section and a small picture of some letters will be there. enter the case-senasative letters in the box above the picture and click the button stating "download this driver......". you will get a new page on which there will be 2 options, one of automatic installation of drivers and other of manual install(.exe file). select the option which suits you the best. after installation of the device please reboot your Computer. and start scanning images. (in win xp you will find the option of scanner in my computer while in win-7 you will find it in printers and scanners in control pannel )
Hope this helps.

Mar 14, 2011 | PC Desktops

1 Answer

Bought a new mfc495cw don't see a port for usb to connect my printer to the computer. How do i get it wireless connected?

Instructions state,

1) Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely in the open position.

2) Connect the USB cable to the USB socket marked with a USB symbol. You will find the USB socket inside the machine on the right as shown below.

From me:
After you lift the cover up, look to the right side, and towards the Front.

This is Brother Support, and the download page for the PDF version of the Quick Setup Guide, plus other manuals needed for the Brother MFC495cw,

Page 16 shows you where the USB cable plugs into.

BEFORE you attach the USB cable...........

It is absolutely IMPERATIVE, that you install the software from the Installation Disk FIRST!

THEN attach the USB cable, and THEN turn the MFC495cw on.

Jun 25, 2010 | PC Desktops

1 Answer

Cybernet Systems ZPC-9000 PC sound system is not working ++ have installed the window 7 and now no sound from the speakers but it show me it is working and my driver realtek up to dates ok even when i...

check all your connections are in properly and are powered on.
if all ok you might have to go back to your original os as not all driver devices are compatable with win 7.
hope this helps.

Jan 19, 2010 | Cybernet Systems ZPC-9000 PC Desktop

1 Answer

Attempt to scan, screen states

This error occurs because the HP scanner can not communicate with your computer and thus won't scan. In most cases this is simply because you don't have all of the necessary drivers installed.
  1. Insert the software CD into your CD ROM drive. The software installer should automatically start
  2. Install the software and restart your computer when prompted
  3. Try to Scan using the Scan To or Start Scan buttons on your printer

Jan 13, 2010 | PC Desktops

1 Answer

Disc burner or software not found

U must be using vista. So uninstalling the scanner or try system restore to time before u installed the scanner(hopefully that is vista compliant) and see if u can burn ur discs, if you can, then there is a resource conflict after installing the scanner, which can be chaged on the drivers--properties--resorce tab..........sodeep

Mar 28, 2009 | Dell Inspiron 530s Desktop Computer

1 Answer

How do I make a call and use this device? Pro 9000

is it the logitech quick cam pro 9000?

Jul 07, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides