Question about Televison & Video

1 Answer

Samsung TV model HCN5527W

Our converange board tested bad. Replaced the new one, and turned TV on smelled something burning. Now cannot get the blue to move and the colors are out of wack. Just wondering why our TV was bought in the middle of 2003-warranty is up and paid $1.999.00.


Thank you Carol Strempler 262-878-4530 jstrempler@wi.rr.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,617 Answers

The actual Convergence amp ICs not located on the convergence board are probaly what killed the origional convergence module, and likewise has killed the new board. You will need to change the convergence ICs first then replace the convergence module.
I would recommend getting the service manual . I can post a link if you would like.

Posted on Mar 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was wondering if someone could help me find which board could be bad on a Samsung PN59D8000FFXZA plasma TV.


look on the power supply board for burned parts. The board that controls the back light may have some burned parts as well.

Jul 05, 2015 | Samsung PN59D8000FFXZA - PN59D8000 59 3D...

1 Answer

Thomson 50DSZ644. Just replaced the Lamp great picture but burned smell.. after few house it smelled verry bad..and i turned off. now when i turn on the tv the picture in middle is dark and still thi


should have unplugged it when you noticed the smell.

UNPLUG and remove and look at lamp you installed--is something in the housing where lamp goes melted? I hope you did not touch the face of the bulb with your hand or fingers.

What ever is wrong find it before trying to use set again.

Dec 22, 2012 | Thomson 50DSZ644 50" DLP Rear Projection...

1 Answer

Hello, Has anyone ever had to replace the Part


If you had replace the y buffer board and it's doing the same thing, you might have a bad panel.

Dec 05, 2009 | Samsung PS50P7H 50 in. HD-Ready Plasma TV

2 Answers

Samsung model number HCN5527W THE PERFECT FOCUS ONLY GOES UP TO 4 PERCENT THEN STOPS THE PICTURE IS HAZEY


You have failed convergence IC's, Have the convergence IC's replaced on the convergence board, Replace them both they are the Large Black IC's mounted on large heatsinks usually mounted on a seperate board above the bottom main boards, The Part # for the IC's are STK-392-040

Nov 23, 2009 | Samsung HCN5527W 55" Rear Projection...

1 Answer

I just replace convergence board on my akai tv and


There is a burnt capacitor somewhere in the unit. Look for any burnt or swelled up capacitors. You can also usually locate a bad cap if there is burn marks on the system board. Also test power supply with voltmmeter to make sure it is a constant volt reading.

Jul 11, 2009 | Akai PDP-42TD1 42 in. EDTV-Ready Plasma...

1 Answer

Samsung HP-R4262- has sound but no picture...


YOU SHOULD HAVE REPLACED THE Y-MAIN BOARD AT THE SAME TIME, NOW DON'T TURN IT BACK ON UNTIL YOU REPLACE THE Y-MAIN OR IT COULD TAKE OUT THE NEW Y-MAIN

Sep 14, 2008 | Samsung SPN4235 42 in. Plasma HDTV

1 Answer

HCL652W


Your convergence ICs are defective and quite possibly the burning smell was likely some of the convergence Resistors burning. Its actually not that exspensive of a repair. you can get a brand new Sub deflection board for your set for 232.00 at the following link and that will fix your set and you just put the new board in. The site will also provide you with free on line tech support to assist you with installing the new board. you need the P54 Sub deflection board. Its available at the following link.
http://servicemanuals.vstore.ca/

Jun 13, 2008 | Samsung HCL652W 65" Rear Projection...

1 Answer

HCN5527W - Shot down burned i


more than likely the flyback transformer has failed and also the horizontal output transistor as well. it is hard to say without looking at the set if you are not a tech then you will need one. these sets are very complicated and the novice going into them risk severe shock or death (30,000 volts).

May 18, 2008 | Samsung HCN5527W 55" Rear Projection...

1 Answer

Bad picture


The STK392-040 Is Convergence correction circuit! but the question is... what is the result when he replace the said parts? ok lets see... the probs. of your TV is a small parts like capacitor maybe this capacitor has change of value thats why the convergence is not in align...

Sep 14, 2007 | Samsung HCN5527W 55" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72230 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

69114 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...