Question about Kyocera FS-C5030N Led Printer

2 Answers

Grey tone problems

My Grey tones come out as red-ish, why?

Posted by on

  • Jalfaro Apr 07, 2008

    Thank you for the info Kemo, unfortunately I do not have those options under the "color reproduction" setting-

    and I pretty much tried them all already... According to the Kyocera site, Im using the latest driver.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 58 Answers

Check PDL in Device settings and set it to PCL XL and then check all colour settings. Retry

Posted on May 03, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 56 Answers

Hi,try this: in the printer driver choose imaging and find "color reproduction" button. Just adjust that balck and gray will be printed FROM BLACK TONER ONLY(print black text and graphic from black toner only)

Regards

Posted on Apr 04, 2008

  • Kemal Muderiz Apr 09, 2008

    Yes, try this options, auto 1, auto 2, auto 3, etc... after that try to install KX driver.



    BR

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Every time I print pictures the people have either a green or a grey tone to them. I have tried just about every setting possible. Any suggestions please?????


Sounds like one of the inks has gone low or empty. That is pretty normal if the cartridge has no more ink in it. Please check the ink cartridge levels and replace if needed.

Aug 11, 2010 | HP Office Equipment & Supplies

2 Answers

HP Color LaserJet 1600 Printer turns paper grey


I had this problem when I used INKJET paper instead of laser paper.

Aug 13, 2008 | Office Equipment & Supplies

3 Answers

Xerox dc 12 copier system faulit 9-354


Hi ,
Sir I am have dc12 mech
its giving error code 9-354.
send me the solution as soon as posible.

Aug 09, 2008 | Xerox DocuColor 12 Color Copier

1 Answer

Konica magicolor 5430 smuding all over page


also there can be problem with the waste toner pipes, that the waste toner wont go away and smug the page. check waste toner box also check transfer belt and pc drums that they are clean.

Jun 03, 2008 | Konica Minolta magicolor 5430 DL Laser...

2 Answers

A Very light Grey shade/Ghost like residue on glossy paper but not reg paper


I have looked and this problem confused me to no end.
I started searching through engineering notes from Xerox and found this line which I am copying and pasting.
This is not my opinion I can send you the entire report if you wish.
But sadly here is the answer.

Although supported, glossy paper will exhibit background toner and is a limitation of the printer technology.

Apr 12, 2008 | Xerox Phaser 7300DN Laser Printer

2 Answers

Prints grey not black


I solved this problem but probably not what the printer manufacturer would recommend! The reason you are just getting grey is that the black ink cartridge is either empty or dried out from non use and only the color cartridge is working. I had the same problem after being away for 5 months. I put the printer cartridge in a bowl of warm water to disolve the dried out ink on the print pad. I dried off the cartridge with a soft cloth and then it worked perfectly.

Feb 25, 2008 | Epson Stylus CX4200 All-In-One InkJet...

1 Answer

Grey shades coming all over the page as well in top back side of paper.


The Developer unit needs to be replaced. It gives background over entire page. If the printer is under 3 years old and is original unit (developer unit) you can get a new one free from Kyocera. Very good warr. from them. Phone number is 1 800438 6482 prompt 2 ; # for the part DV-62. Have your serial # and a status page with you. I work on Kyocera FS printers. Good luck. Russ

Dec 31, 2007 | Kyocera Mita FS 3800 Laser Printer

1 Answer

Prints dark black instead of grey tones


your drum is going bad. or your light or dark adjustment is set too dark ( it should be in the somewhat in the middle).

change drum

Nov 06, 2007 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Kyocera FS-C5030N Led Printer Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

NewYork kyocera HP...

Level 3 Expert

513 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Tech Bravo
Tech Bravo

Level 2 Expert

337 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...