Question about Televison & Video

1 Answer

Sony KV-D2912U A red line right acroos a blank screen, line works it's way up to the top of the screen and sound and vision both normal. Red line takes about 5 minutes to go away. G2 Volts OK.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

Are u saying that the video and sound is ok? And that you have a vertical line moving up your tv screen? If this is correct then it sounds like an A/C hum or filter problem. This would be in the powersupply it could be a big cap that needs changing.

Posted on Mar 17, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Sony drc-mf, 29inch turns on, red light brinks 5 times at intervals

29 inch Sony tv D R C good working but pip & Twoin pics no picture blank plz help me

Dec 26, 2011 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

My rear projection tv has very small red lines running acros the screen in a zig zag pattern from top to bottm how do i fix it

This was posted a long time ago, and by now you've probably dealt with it, but the line you describe sounds like retrace blanking being visible. In any case, this might help someone. As the tubes age, the screen voltage needs to be adjusted, which is simple. Behind the right side speaker grill is a panel that covers the screen and focus adjustments (screens are 3 screws along the top, Focus are 3 below them). From left to right they are for red, green, blue, both top and bottom. With no video input and the PIC control set to PRO (whichwill make brightness, contract, etc at 50%) and in a dark room, in your case, turn the top left screw left and the line should disappear. Then turn it right until the line just appears and left slowly until just after if becomes invisible. Normally you'd do this for all of them, but just do one at a time. That's because when you adjust it, the convergence will need to be adjusted. The right way to do that is to go into the service mode and do it manually. I don't know if the "consumer" flash focus will get you back in line or not, but you could give it shot. If you're not familiar with manual convergence, it's not that it's extremely difficult, but is time consuming. Plus since you'll only have to do the red, you have a shot at it even with minimal experience. Good Luck.

Feb 21, 2011 | Sony Grand WEGA KDP-65XBR2 65" Rear...

2 Answers

I get curved red lines and then screen goes completely red and no sound

This is symptom of defective red picture tube in TV that needs to be replaced.
Let me know if you want to replace it by yourself to provide you part number info or call tv tech to do the job.

Nov 30, 2009 | Sony KP-65WV700 65" Rear Projection HDTV

1 Answer


friend maybe your LCD was broken or loose. try to pull gently if it return to normal image.

Jun 30, 2009 | Sony KV-32TW67 TV

1 Answer

Sony KV-32S66 Picture Rolling Up/Black Horizontal Lines

the problem there is a loose connection on the board,you said that you smacked the right side of the tv and it goes normal.there are parts that should be resolder on the board in order to back into normal operation.

Oct 22, 2008 | Sony KV-32S66 32" TV

1 Answer

Sony KV 25 F3U

TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

Sep 16, 2006 | Sony KV-32S26 32" TV

1 Answer

Red diagonal spottted lines

These are called retrace lines they occur because of the blanking pulse not turning off the electron guns in the picture tube during the retrace period. Since this is occuring with the red gun there may be a proble with the video circuitry connected to the red electron gun of the picture tube. This would include the red amp and the red driver transistors. You will need a schematic and a multimeter to properly test these items.

Aug 03, 2006 | Sony KV-36XBR400 36" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72271 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers


Level 3 Expert

69244 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides