Question about HP PSC 1210 All-In-One InkJet Printer
My HP PSC 1210 all-in-one inkjet printer seems to work fine but after every copy I make the cradle seems to get stuck and sometimes it pulls the paper backwards into the printer. I then get a message that the cradle cannot move and have to hit the cancle button. The printer will reset and then work for a copy or two and do the same thing.
this seems to be a hardware problem..... anyway try this...
> unplug the powerchord
> open the rear access door, and check whether there is any paper jammed or any bit of paper or thread stuck inside.... if so remove it
> clean the rollers using a lint free cloth
> close the rear access door
> open the door so that you will get full access to the cartridges...
> move the cartridges to and fro for several times manually with your hand
> close the door
> plug the power chord
> try again to copy multiple pages
thanks and regards
Posted on Mar 17, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 15, 2011 | HP PSC 1210 All-In-One InkJet Printer
Mar 16, 2010 | HP PSC 1210 All-In-One InkJet Printer
Dec 12, 2009 | HP PSC 1210 All-In-One InkJet Printer
Jul 31, 2009 | HP PSC 1210 All-In-One InkJet Printer
Mar 28, 2009 | HP PSC 1210 All-In-One InkJet Printer
Sep 05, 2008 | HP PSC 1210 All-In-One InkJet Printer
Apr 21, 2008 | HP Office Equipment & Supplies
357 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: