Question about Frigidaire GLTF1670A Front Load Washer

1 Answer

How to write program for running the DOS,UNIX and LINUK command using C language

I want to know the code of the program which run all the commands of DOS,LINUK and UNIX please send me all that coding because tomorrow is my file submission in our college i need to run these all command using C language.Please send me that code on my email-id sagarshinde111@gmail.com

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Dear Sagarshinde111,

Thank you for your excellent question on how to run all DOS and UNIX commands on a Frigidaire GLTF1670A Front Load Washer using the C programming language. I do not know specifically about washing machines, but there is a version of UNIX which has been ported to toasters that would be a good starting point. NetBSD is a full UNIX operating system written in C, and all the source code is freely available to use and change under the Berkeley License (which basically says, do what ever you like, but don't claim you wrote it). You can download it from netbsd.org. You will also find in NetBSD's excellent package source repositories (pkgsrc) the C source code for both DOS and Linux kernel emulation.

I am sorry that we were not able to help you in time for your class assignment (due the next day!), but perhaps this will help the next student who is given this rather challenging homework.

Posted on Sep 20, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washmachine not spining clothes still ring wet


Check the voltage to the motor when the spin cycle is active. make sure the inlet valve opened and allowed water to come in then shut and allows the motor to start. Make sure the front door switch is working to run the program and execute the commands.
If voltage is present on the motor without action then the capacitor is faulty . if not the program controller is faulty.

Mar 29, 2011 | LG WM2455 Front Load Washer

Tip

Problem Accessing a Specific Website ?


Problem accessing a specific site ? Try these solutions.

Clear your browser cache

Try clearing your browser cache. If you are unsure about how to do this; please follow this link : Click here

Sometimes this won’t work and you may need to try something else, if clearing your browser cache is not working for you then now it’s time to do a little trick. We need to flush(clear) our local DNS cache (This is very useful while you are busy moving your site; mostly because your local dns cache usually remembers the previous results for a few more minutes.) Let us see how to clear the local dns cache.

Clearing Local DNS cache (Windows)

If you are using windows then you have to open your command window (go tostart menu -> click on run -> type cmd there and press enter.), make sure you have administrative privilege to do this. Now you have to type a command inorder to clear your DNS cache.


ipconfig /flushdns


this will help you clear the local dns cache (If you are on windows vista you have to start your command prompt with administrative privilege; which can be done by typing cmd in the search field in start menuand then right click and you will see a Run as administrator option and execute the above command)


Clearing Local DNS cache (Linux)


I am using Ubuntu; by default it doesn’t come with the daemon to flush the local DNS cache; so if you are using Ubuntu linux then you will have to install nscddaemon by running the following command in your terminal.


sudo apt-get install nscd


Once nscd daemon is installed you can run by typing the following command

sudo /etc/init.d/nscd restart

If you are using other Linux flavors probably you can try this and see if it works.


try this command in your terminal : /etc/rc.d/init.d/nscd restart


Still your problem is not solved ?

Then most probably it has something to do with your Internet Service Providers DNS cache; So call then and tell your problem, they will provide you with an alternative proxy address, or they will solve the problem for you.


If you are a Virgin Meda Broadband user in UK, then try this


I use the Virgin Media Broadband; they have provided me with a new proxy address : webcache.virginmedia.com and port: 8080


(Follow the instructions here to set up your proxy settings)



Best Regards

NextDoorNerd

on Jul 31, 2010 | Washing Machines

1 Answer

It's flashing code F-28


The communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly. Panne de communication entre le module de commande central et le module de commande du moteur. Possible Causes/Procedure 1. Unplug washer or disconnect power. 2. Check wire harness connections to the MCU, the motor, and Central Control Unit (CCU). - Check connections of the CCU board within the housing. - Make sure all grounding switches are engaged. 3. Check the drive system for any worn or failed components. 4. Plug in washer or reconnect power. 5. Verify CCU operation by running a Diagnostic Test or any cycle. 6. Check the MCU by looking for operations of the drive motor. 7. Check the drive motor for powered rotations. 8. Check that the serial harness at the MCU is not mounted upside down. The wires should be to the left when facing the MCU connectors.

Nov 26, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

F35 error


D?FAILLANCE DU CONTACTEUR MANOM?TRIQUE
If after 30 seconds the control does not detect water
entering machine, the valves will be turned off and the
error code will be displayed. OR If the control has
turned the water valves on and after 8 minutes the flow
sensor has detected 10.5 gallons of water passing
through it, but has not detected the pressure switch trip,
the valves will be turned off and the error code will flash.
Press PAUSE/CANCEL twice to clear the display.
Si apr?s 30 secondes le syst?me de commande n’a pas d?tect? l’entr?e d’eau
dans la machine, le syst?me ferme les ?lectrovannes et commande l’affichage du
code d’erreur. OU Si le syst?me a command? l’ouverture des ?lectrovannes
d’entr?e d’eau et si apr?s 8 minutes le capteur de d?bit a d?tect? le passage de
10,5 gallons d’eau, tandis qu’aucune manoeuvre du manocontacteur n’a ?t?
d?tect?e, le syst?me commande la fermeture des ?lectrovannes et l’affichage du
code d’erreur clignote.
Appuyer deux fois sur la touche PAUSE/CANCEL pour commander l’effacement de
l’affichage.
Possible Causes / Procedure
1. Unplug washer or disconnect power.
2. Check to verify that the pressure switch is
operational.
3. Replace pressure switch.

This is for an F32...there is no F35 fault code on your model according to the service manual....

Sep 11, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Machine gets to spin cycle, stops, and displays Error code 20.


Program does not move on as there is data error on the spin cycle due to wrong commands from the water level sensor/ program drive.
You must see if by choosing another program the fault changes, if so the drain valve or pump is faulty.
Check for dirt in the inlet, outlet valves, clean and set.Check the water level sensor.
This must clear the issue.

Aug 22, 2010 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Have error code f 02 showing up on my Duet fronload washer, during rinse and spin cycle



F/02
DURéE EXCESSIVE DE LA VIDANGE
If the drain time exceeds eight minutes, the water valves are turned off
and “F/02” is flashed. Press PAUSE/CANCEL two times to clear the
display.
NOTE: After four minutes the “Sud” error will be displayed, then four
minutes later the “F/02” error code will be displayed.
Si la durée de l’opération de vidange est de plus de huit minutes, le système commande
la fermeture des électrovannes et l’affichage du code “F/02” clignotant. Appuyer deux
fois sur la touche PAUSE/CANCEL pour commander l’effacement.
NOTE : Après quatre minutes le code d’erreur “Sud” sera affiché; quatre minutes plus
tard le code “F/02” sera affiché.
1. Check the drain hose and make sure it is not plugged
or kinked.
2. Unplug washer or disconnect power.
3. Check the electrical connections at the pump and
make sure the pump is running.
4. Check the drain pump filter for foreign objects.
5. Plug in washer or reconnect power.
6. If the above does not correct the problem, go to step 7.
7. Unplug washer or disconnect power.
8. Replace the pump.

Nov 18, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The water will not stop running


Just after the pace where water pipe connects there's inlet valve [plastic moulded coil, dimmensions about 1"x1"x1"] it sits on the water intake line and there's twi wires connected to it.
Just replace it, As it's foulty and doesn't respond do actual open/close commands

Good luck

Jun 29, 2009 | Washing Machines

1 Answer

My washer will not go through a complete cycle. It flashes F2 and will sit on SUD for ever as well as run on the last 1 minute for an hour. Help


If the drain time exceeds eight minutes, the water valves are turned off and “F/02” is flashed. Press PAUSE/CANCEL two times to clear the display. NOTE: After four minutes the “Sud” error will be displayed, then four minutes later the “F/02” error code will be displayed. Si la durée de l’opération de vidange est de plus de huit minutes, le système commande la fermeture des électrovannes et l’affichage du code “F/02” clignote. Appuyer deux fois sur la touche PAUSE/CANCEL pour commander l’effacement. NOTE : Après quatre minutes le code d’erreur “Sud” sera affiché; quatre minutes plus tard le code “F/02” sera affiché. Possible Causes / Procedure 1. Check the drain hose and make sure it is not plugged or kinked. 2. Unplug washer or disconnect power. 3. Check the electrical connections at the pump and make sure the pump is running. 4. Check the drain pump filter for foreign objects. 5. Plug in washer or reconnect power. 6. If the above does not correct the problem, go to step 7. 7. Unplug washer or disconnect power. 8. Replace the pump.

Jun 17, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

After swith on only drain pump is running. All lights are on. Will not respond to fault tracing program.


Try unplugging overnight. If it won't even fill or respond to any command it is probably a bad board or keypad. I have had this happen to me and after unplugging it seems ok for a few months. I have come home and found only the drain pump running before. This was hours after I started the washer.

Jul 03, 2008 | Asko Washing Machines

Not finding what you are looking for?
Frigidaire GLTF1670A Front Load Washer Logo

Related Topics:

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...