Question about Hotpoint 24 in. FDW60 Free-standing Dishwasher

1 Answer

FDW60 Fast and Eco Lights

Hi,
My Dishwasher appears to work as normal, nearly all the way through the cycle. However near the end the Fast and Eco lights start to flash. The water appears to heat and pump in/out as normal all the way through.

I suspect that when the dishwasher attempts the drying phase it appears to get too hot and then the lights flash.

Do you have any ideas as to what the fault could be.
Thanks

Posted by on

  • Richard B Mar 17, 2008

    Sorry FAST and DELICATE lights Flash, just checked.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

This is a bad control board that if replaced will only repeat in a short time .My advice is to contact the manufacturer and complain,you have the right as a consumer to do so.

Posted on May 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Eco and fast wash lights flashing together and


this does mean draining cycle has timed out due to either blockage or faulty pump...

Dec 21, 2009 | Dishwashers

1 Answer

I have a hotpoint aquarius sdw60 with the eco 45 light flashing fast and will not reset I have tried turning off the power I have stripped the pump this was clear. then reinstalled it but it is still same


I have a Hotpoint Aquarius SDW 60 The delay 3hr &12hr lights are flashing at the same time. Machine won't start. If the door is slamed shut. It get stuck on the Fast & Prewash 40 degree cycle. and stays there.

Jul 13, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Hotpoint dishwasher dwf50


i had the same problem and like an idiot paid for hotpoint to come out and all the guy done was tip the dishwasher backwards to empty the water(which he didn't clean) and tell me that im using to much rinse aid and salt coz we use 4 in1 tabs hope this helps smiley

Mar 20, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

FDW60 Fast and Delicate Lights Flash


This is a bad control board that if replaced will only repeat in a short time .My advice is to contact the manufacturer and complain,you have the right as a consumer to do so.

Mar 17, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

FDW60 Fault


Hold down the start key and you will re- set the D/W.
Please Rate This !!! Thank YOU !!!

Mar 17, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

I have a problem with my dishwasher


This is a bad control board that if replaced will only repeat in a short time .My advice is to contact the manufacturer and complain,you have the right as a consumer to do so.

Feb 28, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

It's Leaking Water!


Most common reason is that the lower spray arm splits on the seem and sprays water under the door, to proove if it is this remove lower spray arm and run through program if no leak fit new arm. Regards Advisor

Aug 30, 2007 | Hotpoint 24 in. FDW60 Free-standing...

7 Answers

Dishwasher error codes please help


I too had this problen today. Printed off a manual from the Hotpoint website. Very helpful troubleshoot section. Anyway, flashing eco and fast lights and beeping sound indicates 'water feed pipe blocked' You need to check the water inlet connections on your tap.However, when we pulled it out we noticed the blue water inlet pipe was slightly kinked. Straightened this out and hey presto! It works fine again. How this happens when its worked ok for 18 months will never know but still. Try it! hope this was helpful...shewoo

Apr 26, 2007 | Hotpoint 24 in. FDW60 Free-standing...

Not finding what you are looking for?
Hotpoint 24 in. FDW60 Free-standing Dishwasher Logo

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

bosch5

Level 2 Expert

157 Answers

AcmeUK

Level 1 Expert

25 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...