Question about Sceptre X9G-KomodoV (Black) 19 inch LCD Monitor

2 Answers

X9g komodo v screen just turned blank (white)

I have done some reseach and i beleave it is a bad logic board . my problem is how or where would i get one ? or how would i go about finding out which part of my board is bad so i maybe repair it ?

thanks for any ideas or help

Posted by on

  • hguice Aug 02, 2008

    screen turns dark just after power
    up. Momentarily displays ok



×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Sceptre Master
  • 848 Answers

X9g komodo v screen just turned blank (white)? This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:service@wisiny.com.thanks,we sincerely hope we can help you!
you can also check this boards whether suit you:
Sceptre LM004 Power Supply Backlight Inverter for X9G KOMODO

Posted on Mar 22, 2015

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

Go to ebay, type X9g kimidi logic board. Usually, some seller might have pulled working parts from other monitors and sell them individually. If you cannot find them, google "buy x9g komodo logic board". Some website, I'm quite sure will sell them.

Posted on Mar 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Sceptre LCD - no display


I have same problem... just went off warranty and they won't cover it.. they want $100 for repair plus $35 shipping plus I have to pay to ship it to them... For $179 I can buy a new 19" with 3 year warranty...I wouldn't buy another Sceptre at half the price

Jul 13, 2008 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Same Flashing Problem


My Sceptre Komodo 19 would turn on for less than a second than turn off. Eventually, I could get it to stay up. But after a month, I couldn't get it to stay on anymore.
I found the solution on this website. There are some bad capacitors... 4 of them for about $2 worth. I replaced all four and the monitor works fine again. They are soldered in. They are polarized; they need to be installed the right way. The white stripe goes towards the “wall”.
2 are 470uf 25v and 2 are 1200uf 10v.
I ordered mine for about $10 with shipping from Mouser.com
661-EKZE250ETD471MJ1 and 647-UHE1A122MPD

44cf31e.jpg5bcc2c5.jpg

Jul 06, 2008 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

4 Answers

Sceptre X9G Komodo IV 19 in


check out any dry solder or burnt and re solder it , hope it helps AJ

May 03, 2008 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Sceptre DCLCD19+ MONITOR WHITE SCREEN


To me it sounds like the bulb is having a problem with powering up. It may be an issue with the power adaptor or the outlet it is plugged into. Have you tried to plug it in, in other outlets?

Dec 20, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Sceptre X9G Komodo IV 19" Monitor


Hi dgp1952, Check with www.lcdrepair.net if you want a repair. Something is wrong with your backlight or the circuit supplying power to it. If your technically endowed, you may want to open the monitor case and clean the dust and lint from around the circuits using a Small paint brush to sweep away any built up dust. Dust can cause the circuitry to heat up faster and put the power supply into Clamp mode. Clamp mode will turn the supply off to certain circuits which may be the reason your display is going black after 5 minutes.

Oct 09, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Sceptre X9G-Komodo IV


I recently came accross one of these monitors (Planar PE191M) with the identical issue. The resolution was to replace the two 470ufd 25V capacitors that are located on the main power board. The main power board also contains the audio circuit and more importantly the inverter circuit that drives the CCFL backlighting. The suspect caps were identified using an ESR meter; if you happen to have one of these meters you can confirm this is the issue with your unit(s), alternatively you can just replace the two capacitors and see if it resolves your issue. Hope this info helps someone out there.

Sep 05, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Flashing green power indicator lamp.


Check out the data plug- you may have bent some pins.

May 31, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

Not finding what you are looking for?
Sceptre X9G-KomodoV (Black) 19 inch LCD Monitor Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sceptre Computer Monitors Experts

Robert Veldman
Robert Veldman

Level 3 Expert

373 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a Sceptre Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...