My transcend pen drive not opens and it is displayed write protected

Hi,
This might happen due to an error or corrupted MBR, which is the sector that allow you pen to be readable and the PC might not recognize the system file being used.
I would try to connect it to another PC with a different Operating system and format it from there.
alternative you can also use Transcend recovery tool. You can download from HERE

I have purchased 8gb Transcend Pen Drive When i Connected the drive in computer a message shows "Please insrt a disk into drive". I have checked in several computers but the problem is same. Although the disk is detected but not shows the capacity when trying to open this message displayed. I have change the drive letter from my computer "Manage" option but the problem is same. What can i do?

Mine is Zero byte. HP USB Disk Format Utility/ Editing registry / Format from Dos are useless.

Hi,
Please open the link below and follow the instructions there to resolve the issue if the problem persist after following the instructions then pen drive is defective.

http://techsalsa.com/solution-to-remove-write-protection-from-usb-pen-drive/

write protected i am not able to copy nor delete files from my 4gb transcend memory card

Dear,
No, problem
Just copy the whole data of pen drive to PC. Now format the pen drive
and paste the data from PC to pen drive again. It will work fine then

Thanks,
Regards,
Rakesh Kumar

Hi Virus or Trojans can run some process that keeps running in background. This not only harms the computer, but also prevents the pen drive from formatting as it shows that the drive is in use. Remove and re-insert the pen drive, don't double click on drive and cancel auto run operations if it starts automatically. Run a virus scan on pen drive, this will help fix the issue. Now format the pen drive.

Hey, the transcend pen drives usually have a small switch on the side of it, ie to turn the write protect on and off, usually a small lock symbol on it, the problem with unreadable files names etc, could be a corrupt partition, i would suggest formatting the drive as long as you aint got any important information on it

good luck:-)

Hey, the transcend pen drives usually have a small switch on the side of it, ie to turn the write protect on and off, usually a small lock symbol on it, the problem with unreadable files names etc, could be a corrupt partition, i would suggest formatting the drive as long as you aint got any important information on it,

All the best

John

On opening my pen drive it displays "Pl insert a disk in drive G