Sorry.........I gave a vcr code. The real code used for the ds19310 is "0154"
I got my all for one instructions down and learned how to make it give me the code that I am using. Then, I programmed that code in the "satellite/" mode and now my ds19310 sanyo will turn on under that mode as well. So the 0154 code IS correct. Let me know if it works for you
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello You are asking for universal remote codes for Sany I assumes, and posts this solution. Actually I didn't understand about your need. So I hereby send teh code list published by Sanyo. It doesn't contain any codes for TVs, at the email address you provided on your complaint post. Check and feel. Five digit universal remote codes for Sanyo are: 10054, 10154, 10159, 11142 [codes with RCA RCR 312W universal remote control] Three digit universal remote codes are: 004/ 013/ 049/ 108/ 110/ 180/ 209 four digit remote codes are: 0049 0097 0110 0004 0268 0012 0108 0180 OK.
Which One-for-All remote do you have? They have many models. The codes and manuals are available here: http://www.oneforall.com/support/manual . How old is your remote relative to the TV? Remote codes are limited to the TVs that were released at least 6 months before the remote was programmed.
For example the codes are Sanyo 0154, 0799 for the URC-9964.
The most easiest solution is purchasing a universal remote control that can scan and identify the code on its own. I just paid $4.94 for a new universal remote control from Walmart. The setup was extremely easy! Hold and press SETUP until the red light stayed on, press TV, and then continuously pressing ON/OFF until the TV turned off. The last step was to press ENTER.
Sorry it took so long to respond to your request for assistance. You
can find the instructions and codes you need to program your
television at the RCA customer support website
[http://www.rcaaccessories.com/rcaaccessories/ ] Copy this web address
and paste it into the address bar of your web browser. This will take
you to the RCA main customer support page. Just go to the universal
remote control section and find your model remote control. Use the
model number to find the technical support information page. On this
page will be a copy of the owners manual and the remote control codes
to use with your products. I hope this information helps you with your
problem of needing instructions and codes to use your remote with your
products. Thank you for using FixYa and have a nice day!
ok...got this nice sanyo ds19310 from brother without remote..have a magnavox universal remote but don't have code for tv or if i can use magnavox codes or can i set remote to it another way...thanks for any help i can get!
megnavox tv code is
Press following key combination
to select item
press cursor(up)and (down)
to change item value press cursor(right)and (left)
cancellation of service mode
press POWER button on the set