Question about Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

1 Answer

Hooking my emachine monitor with compac tower

When i hook my compaq tower into my emachine monitor my screen is blank, the only thing that shows up is thearrow button

Posted by on

  • fordman85 Mar 16, 2008

    what do i need to do to get it to work

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 778 Answers

Jordman85,
Make sure that you are connecting to the video output on your Compaq that is configured (such as a PCI video card versus the integrated Graphics on your MoBo) and when reconnecting monitors, make sure the machine is powered down before connecting or disconnecting.
Since you say that "the only thing that show up is the arrow button", I assume you are referring to your cursor, and if that is correct? You're PC would be attempting to boot to windows and there may be a hardware conflict that may be stalling it. There could also be corruption in the windows installation. But the monitor should be simple "Plug and Play".
More details about your Graphics Card and any recent hardware software changes/occurrences that have taken place would help.
Good luck.

Posted on Mar 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my hp m6-1035dx have a Black screen after start-up?


You're on the right track and probably resolved the problem by now, it's what I would of been looking at as well seeing it works fine when connected toan external Monitor.

Cheers.

Sep 03, 2014 | HP M6-1035DX 15.6 Laptop A10 X4 2.3G6GB...

1 Answer

Utube uses 100% of my cpu compacity


Yea, it may be time to upgrade. To be honest an upgrade may not be even enough. Start considering a whole new system if you want to take advantage of today's media rich environments.

Nov 22, 2012 | Compaq Athlon XP 1700+ , 1.47 GHz...

2 Answers

I have a Compac D300A Desktop you said for me to


If you want to boot your computer with disk you need to set first boot device as your cd or dvd rom.
For that when you power up the computer press F1 or F2 or "del" then you can enter in bios.
Then go to boot option then set first boot device as your cd ro dvd rom .then save settings and exit.
Then put disk in rom then it boot with that disk.
Let me know if you need more assistanse.
Thanks.

Sep 20, 2009 | Compaq Computer Processors

1 Answer

Black on two sides of monitor


For the Start menu, I assume you're talking about the taskbar that appears on the bottom of the screen. Press the Windows button on the keyboard (usually located between the Ctrl and Alt button on the left hand side).Right-click on the Start button. Click on the Taskbar tab and check the box that says "Lock the taskbar". Your taskbar should return to your desktop.

Wallpaper (desktop image)

In XP:
Right click on a blank space anywhere on the desktop. Click on graphics properties. You should see a window with your Wallpaper previewed in the top window. Click in the Settings. There should be a setting for "Stretch". Select Stretch and your desktop should return to normal.

In Vista: Right click on a blank space on the desktop, click personalize/display settings/advanced settings Click on your graphics card if available or graphics properties. You're looking for Aspect Ratio options From here you will see a setting with 2 options
  1. Maintain aspect ratio
  2. Full screen (no border)
Depending on your graphics card, this process may differ slightly, but the setting you need is Aspect Ratio

I hope this answers your questions. Best of luck.
Greg

Jun 15, 2009 | Compaq (388110-001) Pentium III, 450 MHz...

1 Answer

I have a new compaq parsario


restart the machine, and go to safe mode.
change the refresh rate of the monitor to 60Hz and 800X600 resolution.
restart the machine

Nov 30, 2008 | Computer Processors

1 Answer

My display colors are fadded and shadowed I have switched monitors and same on both monitors?


Check you plug to see if one of the pins are bent over and also pull the video card and reseat in the computer sometime it only takes a little bump to make them move if it is not that then its the video card seeing that you already upgraded your software

Sep 24, 2008 | Compaq Pentium 4 , 1.5 GHz (244318-B21)...

1 Answer

Hp computer


Id your motherboard also has onboard video, and you have a graphics card, make sure that you try both connections. Chances are if you are using a graphics card and your computer thinks your using onboard, then you will get the no signal or vise versa.

Jun 10, 2008 | Intel (RK80532PG0881M) Pentium 4, 3 GHz...

1 Answer

S-Video port on my Compac Presario V5000 Laptop


try installing manufacturers Drivers for your video card... You're probably using the "default" drivers.. Might fix it to get the current ..

May 17, 2008 | Compaq Presario-Notebook 900 Series Video...

1 Answer

Hooking up keyboard and mouse


... Well, first things first, are your keyboard and mouse USB or PS/2? Chances are if it's a really old computer it doesn't have any USB ports. You would then need either 2 USB to PS/2 adapter (typically small green and purple adapters) or PS/2 keyboard and mouse.

Hope this helps!

Alex J.

Mar 09, 2008 | Intel Pentium M 740 1.73GHz 533MHz 2MB...

Not finding what you are looking for?
Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computer Processors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Shafky Khan

Level 2 Expert

85 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Intel Computer Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...