- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had the same problem, couldn't adjust the volume but could mute with both buttons (indicating that there wasn't anything wrong with the controls themselves). Tried re-connecting, turning off and on, etc. Nothing worked. Then I took the mains power supply out of my Samsung NC10 netbook that the speakers were connected to (so that it was running on battery power) and the volume controls started working! I don't know why this worked but it did.However, when I was trying to adjust the volume when the netbook was on mains power I got interference through the speakers which may be related. Hope this helps.
If the power light on the speakers isn't on, then the power supply going to the speakers is either in a bad outlet (test the outlet with a voltage meter) or the plug isn't firmly seated. Best of luck in your new home and hope this solves your problem. Greg
Am sure that the internal transformer is gone, You would have powered your speaker with a step up/step down transformer, you need to see a technician around you that can help you out, you need to replace a 220V-230V transformer in the speaker since your country requires that.
Good day and happy holidays
you have to look at back of your comp, if you has a 5.1 speaker first, like Creative Audigy, live, or X-FI, then according with the cables, colors, must be, Green . black, according for output sound, see manual for the cables and put at back according.
Mr. Vargas is right mine also won't turn on and upon further inspection I found burn discoloration on the boad where the two power cables are connected. The burn spot is where the four diodes are locaed and the big power cable connection. I am not sure how to replace these diodes or where to find them. Never done this stuff but will try for sure. Please post if you have any suggestions. thanks