Question about Lands Phones

5 Answers

Pulse and tone

I need to change my phone to tone it's on pulse and i don't know how

Posted by on

  • fa82949 Apr 10, 2008

    us, too. somehow it got switched to pulse this past weekend and we can't figure out how to switch back. don't see anything in the user's manual about it. now, none of the features of telephone systems will work at the places I call as they rely on tones to be able to select them.

×

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

In GE:

TONE/PULSE DIALING
This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing. The phone is pre-set for
touch-tone use. To set to tone or pulse dialing:
1. Press and hold the program button for two seconds. You will hear a beep.
2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing.
3. Press the program button again. You will hear a confirmation tone.

Posted on Aug 09, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Try the star key

Posted on Oct 09, 2008


I need to change my phone to tone it's on pulse and i can't figure out which button i pressed that got me to that option.

Posted on Jul 29, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi. This is Shoaib Bukhari.
In some sets by pressing set button one by one you can see the option of tone or pulse. When you see this option select your desire by pressing up or down buttons. If problem solve then its ok. And in some sete only by pressing * key can solve the problem that is changing from pulse to tone or from tone to pulse.

Posted on Feb 18, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have to press 9 on my phone to let in folks at door, I've tried the menu / settings / hitting the * key, nothing seems to allow a TONE to happen, just that quick pulse.

Posted on Jul 09, 2011

  • dangerboy40 Jul 23, 2011

    Administrator Manual available athttp://support.avaya.com/css/P8/document...

    See SYSTEM customization for setting default for all handsets ... Good Luck!

×

5 Suggested Answers

  • 1 Answer

SOURCE: Changing from Pulse dial to Tone

Go to Menu > Set tel line > Set dial mode > Tone. That should solve it.

Posted on Aug 08, 2009

  • 1 Answer

SOURCE: changing from pulse to tone dial

All phones have a sliding switch either at the bottom or sides of the instrument. The same is marked with "P" & "T" on either side of the switch, meaning Pulse or Tone. Shift the sliding switch to T for Tone or vice-e-versa.

Posted on Dec 12, 2008

smartr10U
  • 1305 Answers

SOURCE: Need to change phone back to tone dialing

Here's what the manual says: Changing the Dial Mode (Tone or Pulse Dialing) (HS1 only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, follow the steps below to modify your phone?s settings: With the phone in standby, press and hold [cid/menu]. Press [vol/ / ] to move the pointer to select DIAL. Press [select/channel] to set the phone to pulse dialing. Press [end]. Return the handset to the base. The handset communicates the new setting to the base, and the base activates the setting on any other handsets. Hope this helps out. K

Posted on Jun 05, 2009

  • 102366 Answers

SOURCE: VTECH VT-2406 TONE- PULSE SETTING ?

http://www.vtechphones.com/vtechui/support/manual.cfm?manualID=373

Posted on Jul 19, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please , i want to change to pulse


Usually, phones have switch-button for Tone/Pulse mode situated somewhere on its body. I don't know what phone you wrote about. - I can't find it on Internet.

Nov 05, 2012 | Lands Phones

2 Answers

How to change Beetel M71 from pulse to tone dialing


I'm using Beetel M71 model phone but couldn't find program button on my phone. Could you please let me know how to change pulse to tone on this model.

May 10, 2012 | Lands Phones

1 Answer

I HAVE A VTECH PHONE THAT IS ON PULSE AND I WANT TO CHANGE IT


Press MENU/SELECT to display menu when in idle mode.

Press up/down to reach Setup BS. Press MENU/SELECT.

Press up/down to reach DIAL TYPE. Press MENU/SELECT

A checkmark is shown next to the current selection. Press up/down to choose between tone and pulse. Press MENU/SELECT.

The screen displays Stored and youll hear a confirmation beep.

Nov 19, 2011 | Vtech Cordless 6041 Phone

1 Answer

I have 2 problems. 1. The orange message light will not stop flashing no matter what I do. 2. Some how the system was switched from touch tone to dial tone. I can't seem to that switched either.


Resetting the voice message waiting indicator
When you receive a new voice mail message, the new message LED on the top of the handset flashes. In the event your message waiting light gets out of sync with your phone company's
voice messaging system, you can manually reset it back to the "No messages waiting" state.
1. Press and hold FiND on the base for five seconds.
Note: The handsets connected to the base will start to beep, however, keep pressing for five seconds.
2. A beep sounds and the message alert tone is reset.
Changing the dial mode
Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, please follow the steps below to modify your phone's settings:
1. Press MENU/SELECT.
2. Select the Global Setup menu, and then the Dial Mode submenu.
3. Scroll to highlight Pulse.
4. Press MENU/SELECT. You will hear a confirmation tone.
If you ever need to change the dial mode back to tone dialing, follow the same procedure, but select Tone in step 3.

Finally for future ease of use, here is a link to the user manual were I copied the above information from:

http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1580-3om.pdf

Jul 21, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

How to change it from pulse to tone


look through the menu options. you will find the answer to your question.

Oct 05, 2009 | Lands Phones

1 Answer

Phone went from touch tone to pulse. . .


Hello,

Read the manual to reconfigure that option. (Look for Setup button on the phone) I can't guess what model you have. On older phones one could find a switch on the the phone to flip between Tone and Pulse.

Sorry I could not be of much help.

Sep 04, 2009 | Uniden Cordless Telephone

2 Answers

Need to change phone back to tone dialing


Here's what the manual says: Changing the Dial Mode (Tone or Pulse Dialing) (HS1 only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, follow the steps below to modify your phone?s settings: With the phone in standby, press and hold [cid/menu]. Press [vol/ / ] to move the pointer to select DIAL. Press [select/channel] to set the phone to pulse dialing. Press [end]. Return the handset to the base. The handset communicates the new setting to the base, and the base activates the setting on any other handsets. Hope this helps out. K

Jun 05, 2009 | Uniden 2.4 GHz Cordless Phone System

8 Answers

Cordless telephone sw/from pulse to tone


dear,
check this link and hope it will solve the problem

http://www.epinions.com/content_56960192132

regards,

Aug 15, 2008 | Uniden Cordless Phone

2 Answers

TC1200 TONES/PULSES


There is usually a switch to change it from dial pulse to touch tone.If there is no switch check your user manual to see if there is a screen option.

tk46

Jun 19, 2008 | Panasonic KX-TG1033S Cordless Phone

1 Answer

GE 29439GE2


Copy directly from the manual: TONE/PULSE Your phone is set to TONE at the factory. Set the TONE/PULSE selection to PULSE if you have pulse (rotary). If you don't know which type of service you have (pulse or tone), check with your phone company. To program TONE/PULSE for all 3 lines: 1. Press STORE/IN 2. Press 0 for PULSE or Press 1 for TONE 3. Press STORE/IN 4. Press TONE To program TONE/PULSE for each line individually: 1. Press STORE/IN 2. Press 0 for PULSE or Press 1 for TONE 3. Press STORE/IN 4. Press LOWER 5. Press line number (1, 2, or 3)

Jan 11, 2007 | GE 29439GE2 Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

3,705 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4954 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...