My Fisher and Paykel GW712 has three flashing lights and beeping when i turn it on. Along the cycle bar at the top the third and fourth light and the second last light from left to right flashes. I have been told its error code 60. Any ideas how to fix this problem would be appreciated.
Hey I'm getting a F22 fault, and when I reset it and restart it, the door switch just buzzes and...
(More)
Hey I'm getting a F22 fault, and when I reset it and restart it, the door switch just buzzes and then faults out, is there a fix for this? Thanks
This is a new problem (machine 2 years old). (My second post in response to kamatchi's solution...
(More)
This is a new problem (machine 2 years old). (My second post in response to kamatchi's solution (Thank you. I sorry that don't understand the part about ''revit''). The problem gets worse with every load. The machine is level and all 4 feet are firmly on the flat concrete floor. The machine thumps and walks during the spin cycle unless I (200 lbs) sit on it. Then it only thumps horridly. a) This occurs no matter the size of the load. b) I removed the lid (2 screws, slide lid back) and checked the upper springs. They do not seem to be elongated. Nothing seems out of place or broken inside (but what do I know? Very little). I live 100 miles from the nearest service tech, so any do-it-yourself help is particularly appreciated. Many thanks.