Question about Kenmore 22422 Top Load Washer

1 Answer

Washer rattles when on spin cycle as if the bowl was loose. how do i open it to? how do i fix it?

Posted by on

  • luz65 Mar 26, 2008

    I have a Kenmore Series 70 washing machine that I just replaced the neutral gearcase assembly and the coupling. Upon starting the machine it goes through the washing cycle with no problems, however, when it starts the spin cycle it makes a clicking sound which gets louder. Any idea what the problem might be? It sounds like its coming from the lower clutch assembly. I took it all apart and everything looks fine (nothing broken or stressed).

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

You nailed it buddy something in the spin tube assembly or the little clutch deal isn't right. they can look good but not be good also the unit won't make a good spin due to the slipping and clothes will still be wet. if the unit works okay and the noise isn't loud you could let it go but I wouldnt and if you did the gearcase I bet you wouldn't either. I have a trick for removing the gearcase without even taking the case off the unit. real easy 30 minute trans swap can chat you through it if you like.

Posted on May 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes my frigidaire top load washer to vibrate and make rattling noise during spin cycle


There are springs and bumpers/shocks in the machine that hold the tub. When they break or come loose, the tub wobbles.

Jan 03, 2016 | Frigidaire FAHE4044MW Affinity High...

1 Answer

Asko Washing machine- On spin there is a rattle sound bottom of bowl. Checked all outlets all clear and ok


sounds like something jammed between the inner and outer drum. usually a pesky curtain hook ! not much help I know.

Mar 02, 2015 | Asko W6021 Front Load Washer

1 Answer

Fridigaire fwb9200es1 washer making rattling noise when spinning


Hello terilym - From what you have described it sounds like you possibly have foreign objects such as coins or safety pins in the tub or pump. I suggest unplugging the washer and carefully check the tub and to verify that the drum is also not damaged. If noise continues after washer is restarted, objects may be in the actual pump. Contact a professional to accurately diagnose and repair the unit.

Sep 30, 2012 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Noise in the spin mode on a Amana LWA50AW top load washer


Based on your description, it sounds as if your outer spin bearing is faulty. See link below for an illustration of the bearing. Special tools are required to replace this item.
Illustration provided by; www.repairclinic.com

http://www.repairclinic.com/SSPartDetail.aspx?s=t-ALW480DA-%3d%3di549695&PartID=549695

Aug 07, 2009 | Amana ALW480DA Top Load Washer

1 Answer

Ariston Margarita 2000 NOISY spin cycle....


Remove drum drive belt, and spin drum by hand, if there is any resistance,. or it feels rough or noisy, the the main bearigs have probably failed.
If it is o/k then check motor for worn or noisy bearings,
Please rate my solution.
Thanks.

Jul 24, 2009 | Ariston Technologies Ariston AWD12 Front...

1 Answer

Spin cycle makes washer rattle too much


Open the door and then reach inside the washer and grab the front of the inner tub with your finger tips. Can you wiggle the inner tub inside the outer tub? If so, your spider shaft supporting the inner tub is cracked and needs replaced. It is quit a job for the average handyman. Most often the professionals mustr be brought in for this repair.

Let me know if I can help further,
Eric Campion

Mar 03, 2009 | Frigidaire Affinity ATF6000ES 3.5 Cu. Ft....

1 Answer

Rattling noise during spin cycle


Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.

Nov 12, 2008 | Maytag MAH2400A Front Load Washer

2 Answers

HELLO, WSL100D0WW IS MAKING NOISE ON DRAIN/SPIN CYCLE.


Or, you have coins in your pump casing. Look on the back of the washer, and unscrew the circular port in the bottom right corner. (Keep an 8x13 baking pan underneath, water will escape once you open the chamber). Remove and change/objects from the chamber and replace the port. You should be good to go. This is actually very common for this model washer.

May 17, 2008 | GE Spacemaker WSLP1100D Top Load Washer

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...