Question about BenQ FP71G 17" LCD Monitor

1 Answer

Black screen When I turn on my computer the screen just comes up black...any suggestions

Posted by on

  • timgill Mar 18, 2008

    Hi, I have the same problem. A black screen when i switch my computer power on. The menu panel doesn't show up when I press the buttons on the monitor either. Tried hooking it up to my laptop and still no picture. Wanting to avoid buying a new monitor, any advice? thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 85 Answers

Does the monitor's menu work? To test this, just start punching button's on the front of the monitor, and if the OSC comes up, then you know that the monitor is probably not the problem. Does you monitor have more than one input? If so, try switching them to see if you computer is outputting them. Also, try the monitor with another computer. Once you've tried this, let me know, and I will give you more suggestions if it still doesn't work.

Posted on Mar 16, 2008

  • Matthew Haynie
    Matthew Haynie Mar 18, 2008

    Have you tried unplugging it and plugging it in again? If that doesn't work, I think that you'll just have to buy a new monitor...

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zeki 10" tablet won't load


Hi, Is your Zeki fully charged? My suggestion is to hold the on/off button for a few secs. to fully power down. Put it on the charge and let it fully charge before trying it again. Then try turn it on again.

Feb 18, 2013 | Shopnbc Zeki 10" 8GB Android 4.0 Ice Cream...

2 Answers

Computer monitor screen stays black


please check the signal cable..... sometimes the signal cable gets faulty and it would be best if you replace it..

Jun 02, 2009 | LG Flatron L1710S 17" LCD Monitor

1 Answer

Black screen, power button flicks


The monitor should come when the power button is pressed once - period. If not, and it continues to happen when connected to another PC, then the hardware is having trouble powering up the panel / ccds and it should be replaced/serviced according to the terms of the warranty. I suggest to bring it to an authorized service center for proper diagnosis & fix the problem. regards

May 21, 2009 | ViewSonic VG2230WM LCD Monitor

1 Answer

Black screen coming out of a game


I would highly suggest uninstalling the Radeon drivers, download the latest drivers for your card from the link below. Pick your driver here:
http://support.amd.com/us/gpudownload/Pages/index.aspx

Please rate my solution, if it helps.

May 16, 2009 | iiyama AQU5611D BK (Black) 22.2" LCD...

1 Answer

Black screen with box of 'Suggested resolution 1280 x 1040 60Hz'


The Samtron 73V has a maximum resolution of 1280*1024, are you running at that resolution ?

Mar 15, 2009 | Computer Monitors

1 Answer

Monitor flashes on when I turn computer on, then screen black


Your monitor power supply or inverter board have gone bad. Its not your computer video card

Apr 17, 2008 | Westinghouse LCM-19v1 Monitor

1 Answer

Black screen


how can u fix this black screen? the green power light is on, shows vista for a bit then turns black and stays black. any solutions or do i have to send it back?

Apr 03, 2008 | Microsoft HannsG HU171D 17" LCD Monitor

1 Answer

Monitor goes black


Sorry to have to tell you this, but this is common in LCD monitors. The reason that it is going black when it boots is for one of two reasons. You either have a bad power supply that powers your LCD or your LCD's backlight is blown. These can be repaired or you can purchase a new one. But if it goes black 9 times out of 10 is because the backlight is bad. These can be repaired!

Nov 26, 2007 | Acer AL1711 17" Flat Panel LCD Monitor

1 Answer

Black screen


How old is the computer? Make sure that the power light comes onto the monitor when you plug it in, should be orange and then turn green when video card syncs with it when PC is turned on. If you are getting black screen when PC is powered on:
1. Bad video card
2. Bad video cable
3. Bad monitor
1Solution: Try using a different monitor attached to this same PC and see if it works. If it does, then its the monitor, its cable, or its power supply. If it doesn't work, then its the video card or the video cable coming from monitor.

Nov 24, 2007 | Daewoo L700C 17" Flat Panel LCD Monitor

Not finding what you are looking for?
BenQ FP71G 17" LCD Monitor Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computer Monitors Experts

Tony

Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a BenQ Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...