Colors are bleeding together and words appear double struck. The picutre itself sometimes is double. This is an intermitent problelm, comes and goes.

You might have air lock in heater matrix when bleeding it put heat on full an nd let it get to temperature and bleed it then ..I had a Volvo f12 globetrotter that would overheat coming up Mont blanc at minus 20 outside temperature it was radiater changed perfect after

your red convergence circuit is defective and requires attention

check you cartridge, is it new and genuine, if you have not troubles in cartridge, check the cleannig station

do to menu; then change the brightness/contrast/sharpness/color controls down also make sure the tint is in the middle.

have you tried the blue convergence adjustment via menu

Sounds to me like a few possible things...

1) Bad connection to the monitor, check the cable connection, if you see or suspect any damage, buy a new monitor or test with a friend's monitor.

2) Video card could be bad, if it has a video card, you could simply buy a new card to see if it will fix the problem. If the video port is attached to the motherboard (meaning onboard video), the motherboard could be damaged.

3) The motherboard could be bad. Sometimes fried motherboards will garble the screen like this on bootup.

see if the mirror in side is broke or cracked

You appear to be having the same problem that I am having. I just found this solution and have ordered the parts, but not repaired yet. I think this link may help.

http://www.fixya.com/support/t921322-double_image

sounds like loose connections on the convergance amps ic's
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html